List,
Another hardware possibility.
Double the 10 MHz to 20 MHz.
With another circuit of 74HC390’s divide 10 MHz to
200 KHz. Then double it twice to 800 KHz
with LM 1496 DBM’s. Apply the two
frequencies to a LM 1496 DBM and use a LPF to get the 19.2 MHz.
Hardware complicated? A bit.
List,
My reply to Javier Herrero
P Double
the 10 MHz to 20 MHz.
P With
another circuit of 74HC390’s divide 10 MHz to 200 KHz. Then double it twice to
800 KHz with LM 1496
DBM’s. Apply the two frequencies to a LM
1496 DBM and use a LPF to get the 19.2 MHz.
P Hardware
complicated? A
I'm glad I asked this question. I was hoping to get ideas I'd never think
of.
It's going to be hard to beat that TI PLL chip especially because TI offers
free samples.
The injection idea seems almost like cheating. I might use part of the
idea below to divide down 10MHz then inject that into the
Since the actual crystal frequency appears to be 19.2 MHz rather than
19.5, my original suggestion of injection locking it would have to be
modified. For example, you could divide the 10 MHz by 25 ( a single
74HC390 could do it) to make 400 kHz, so 19.2 MHz could sync to the
48th harmonic.
Ed
On 07.06.2013 19:23, Perry Sandeen wrote:
List,
Another hardware possibility.
Double the 10 MHz to 20 MHz.
With another circuit of 74HC390’s divide 10 MHz to
200 KHz. Then double it twice to 800 KHz
with LM 1496 DBM’s. Apply the two
frequencies to a LM 1496 DBM and use a LPF to get th
I received this all jumbled up in one long line without any sort of
formatting, because the sender's mail client does not use
standardized structure -- so I don't know who wrote what:
A 74HC4046 can reach 19.2 MHz
Be very careful about specs like that and be sure to read all the
fine print.