Boy do I agree with Dave's comments. Even if the big block inverter is bad
it can all be replaced. I have a small inverting supply in my unit to
replace one leg. I think it was the -5V supply. Its been running for 7 plus
years.
Good luck
Regards
Paul
WB8TSL
On Mon, May 23, 2016 at 6:54 PM, Dave M
On 5/23/2016 3:54 PM, Dave M wrote:
Dan,
If you haven't already found the Z3801A page at
http://www.realhamradio.com/GPS_Frequency_Standard.htm, you should
read it thoroughly (in your case, especialy the section on the power
supply). there is a good pictorial that shows locations of all the
Dan,
If you haven't already found the Z3801A page at
http://www.realhamradio.com/GPS_Frequency_Standard.htm, you should read it
thoroughly (in your case, especialy the section on the power supply). there
is a good pictorial that shows locations of all the power supply test
points. Using that
My Z3801 power supply board has given up the ghost. It had been working
well apart from an occasional Error 230 causing it to go into Holdover
for no good reason from time to time which may well be related of course.
Does anyone have a good power supply from an otherwise dead unit which
might
