> From: saidj...@aol.com > To: time-nuts@febo.com > Message-ID: <c3e9.212979a6.3cdd7...@aol.com> > > I figured out that the unit fluke.l sells is running firmware to emulate > the Motrola M12+ receiver or similar. So WinOncore 12 does work, and I can > get the following receiver ID: > > COPYRIGHT 2008 Trimble Navigation Ltd. > SFTW P/N # 0000 > SOFTWARE VER # 0.03.0 > SOFTWARE REV # 00 > SOFTWARE DATE 04/27/2009 > MODEL # 3011 > HDWR P/N # 0000 > SERIAL # 20393136 > MANUFACTUR DATE 06/05/2009 > OPTIONS LIST 0000 > > I'm very curious. I've now seen 2 postings with 2 different GPS modules (this one, and the Navman) which supposedly emulate Motorola Binary mode. These should (as confirmed above??) allow the use of these with WinOnCore and directly with NTP, assuming that enough of the protocol is emulated to allow drop-in replacement. Has anyone tried this, including setting TRAIM, satellite angle, etc with WinOnCore in MotBin mode, and seeing the performance (especially in comparison to Native TSIP or Jupiter Binary)?
I'd consider using these to replace some of my aging UT+ Oncores..... _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.