Hello, I was inspiring by PHK's post of his open-source GPIB monitoring system to mention that I'm working on remote monitoring and control of my newly acquired PRS-10. I've read the posts in the lists archive about how the discipline against a GPS external PPS is not optimal.
I've been working on a C program to display the parameters from my PRS-10 and present its state in logical blocks with conversion of raw values to real-world voltages and frequencies. That's inspired by Brooke's screenshots of his LabView program. However, since I want to do remote monitoring, I'm using ncurses to layout the full-screen display so I can monitor with ssh to my monitoring system. When I get done with that, I'll post it as open-source to my git repository at http://git.b9.com. However, the monitoring is only a portion of what I want the program to do. I'd also want to add reading from a M12+T's sawtooth correction to get better short-term stability of the PRS-10's PPS signal. Does anyone have a code sample or general thoughts about what to monitor on the PRS-10 and the GPS PPS signal and how to get better short-term stability out of the PRS-10's PPS signal that using the PRS-10's firmware alone? Thanks, Kevin _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.