Len Cutler had a cylindrical oven assembly from a 106 on
display in his office. I wonder if he knew just how good these
were. I think he got to exercise his perfectionist tendancies
on this one, without any "supervision" from the usual suspects.
Rick Karlquist N6RK
Yes, I was able to share my
The 107BR ain't no slouch either. Mine's been on for over a decade. I
check it against an Austron 2100F. Sorry, I don't have the data to hand at
the moment.
-John
===
> Hi Jim,
>
> I'm glad you've made progress on it. The big old 106B is the
> best quartz frequency standard hp ever
Tom Van Baak wrote:
> Some long-term plots of a hp 106b are shown here:
> http://www.leapsecond.com/museum/hp106b/
> but I see that old page doesn't include any recent short-term
> performance plots.
>
> /tvb
That is awesome performance. Out of the hundreds or thousands
of 10811's and E1938's I'v
ent"
Sent: Thursday, July 30, 2009 4:22 PM
Subject: Re: [time-nuts] Service manual for HP 106B Quartz Oscillator
Hi Stan, (and time-nuts because this may interest someone).
Well I've made good progress. The 1000 uF capacitor fixed a lot of things.
After letting the unit warm up f
gt;
>> Stan
>>
>>
>> -Original Message-
>> From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
>> Behalf Of Jim Palfreyman
>> Sent: Tuesday, July 28, 2009 7:48 PM
>> To: Discussion of precise time and frequency measurement
uency measurement
> Subject: [time-nuts] Service manual for HP 106B Quartz Oscillator
>
>
> Does anyone know where I might get hold of one of these manuals? (I've
> looked in the usual places) I have one of these devices and it needs a bit
> of work.
>
> Regards,
>
>
106B or 105B?
Joe
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Jim Palfreyman
Sent: Tuesday, July 28, 2009 8:56 PM
To: Discussion of precise time and frequency measurement
Subject: [time-nuts] Service manual for HP 106B Quartz
Does anyone know where I might get hold of one of these manuals? (I've
looked in the usual places) I have one of these devices and it needs a bit
of work.
Regards,
Jim
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.fe
