Don't remove the serial mouse, just disable it. If you remove it, it
will return on the next reboot.
On 2/7/2015 9:11 AM, Jim Lux wrote:
There's also the whole "microsoft serial mouse device" problem. A
typical Windows 7 install (and other versions as well) will have a MS
serial mouse device
> -Original Message-
> From: time-nuts [mailto:time-nuts-boun...@febo.com] On Behalf Of joerg
> Sent: Saturday, February 07, 2015 7:14 AM
> To: time-nuts@febo.com
> Subject: Re: [time-nuts] TimeLab with Wine: No RS232 interface available
>
> Thank you all. Unfor
On 2/7/15 7:13 AM, joerg wrote:
Thank you all. Unfortunatly I'm still not able to get TimeLab
in contact with any of my RS232 interfaces. Is there may an
option when calling limelab.exe to force the usage of a
defined port?
Inbetween I tried also a lot with system.reg. HTerm is very
tolerant to
Thank you all. Unfortunatly I'm still not able to get TimeLab
in contact with any of my RS232 interfaces. Is there may an
option when calling limelab.exe to force the usage of a
defined port?
Inbetween I tried also a lot with system.reg. HTerm is very
tolerant to the names given to the ports, Time
I have seen several issues with Windows programs not releasing (or perhaps
not being able to releaase) the serial ports after using them. Once one of
these programs accesses the serial port, no other programs can use it until
you re-boot. I'm fighting windoze Hypertrm right now over this iss
On 2/4/15 3:55 PM, Mark Sims wrote:
I have seen several issues with Windows programs not releasing (or perhaps not
being able to releaase) the serial ports after using them. Once one of these
programs accesses the serial port, no other programs can use it until you
re-boot. I'm fighting wi
The trick is to link /dev/ttyS0 (or whatever) so that it occurs in
~/.wine/dosdevices/com1 which seemed to help a bit.
Cheers,
Magnus
On 02/04/2015 09:49 PM, joerg wrote:
Hello,
I would like to ask some advice about running TimeLab under Linux with Wine.
The program starts well (at least I gu
I have seen several issues with Windows programs not releasing (or perhaps not
being able to releaase) the serial ports after using them. Once one of these
programs accesses the serial port, no other programs can use it until you
re-boot. I'm fighting windoze Hypertrm right now over this iss
Hello,
I would like to ask some advice about running TimeLab under Linux with Wine.
The program starts well (at least I guess), but no RS232 interface is found
in the acquire window. I tried the com port of my notebooks docking station,
a PCMCIA to RS232 converter and 3 different USB to RS232
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
10 matches
Mail list logo