Alan Melia wrote:
> Hi Didier, thanks for that idea, yes they were all "pucks" all Garmin two
> intended for marine use and one was a old Garmin GPSIIplus with a mag
> "puck". I have a Trimble Palisade that I have not got round to working on
> yet, but I understand that there are problems putting
Robert Berg wrote:
> I picked up a couple of prewired cables for the Palisade from tiger-
> tech.biz
>
Thanks Bob,
I'll follow that up.
Cheers - Dave
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin
Tom Van Baak wrote:
> Google for Trimble Palisade or see if this helps:
I did :-)
Thanks for the additional site, I'd not seen that.
Cheers - Dave
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mai
[EMAIL PROTECTED] wrote:
>
> In a message dated 14/07/2008 21:09:41 GMT Daylight Time,
> [EMAIL PROTECTED] writes:
>
> Does anyone have any useful information on using it, or should I open it
> up and replace the multiway socket and see if I can do something else
> other than mount it out
I picked up a couple of prewired cables for the Palisade from tiger-
tech.biz
They had both short (~2 or 3m) and much longer cables in stock. Prices
weren't bad, either, as I recall.
Bob
On Jul 14, 2008, at 1:08 PM, David Ackrill wrote:
> For a very good price I bought a Trimble Palisade the
> Does anyone have any useful information on using it, or should I open it
> up and replace the multiway socket and see if I can do something else
> other than mount it outside as another time standard?
Google for Trimble Palisade or see if this helps:
Trimble Palisade GPS 1 PPS time source
htt
In a message dated 14/07/2008 21:09:41 GMT Daylight Time,
[EMAIL PROTECTED] writes:
Does anyone have any useful information on using it, or should I open it
up and replace the multiway socket and see if I can do something else
other than mount it outside as another time standard?
Thanks
For a very good price I bought a Trimble Palisade the other day.
It came without the multiway plug, so I wonder if there's a source of
those anywhere?
I did find websites for programs for extracting 1PPS data, and even an
add on NMEA board, but I'm not really bothered about that.
Does anyone h
Thanks, Don. I ordered a couple of them.
Bob
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Don Mimlitch
Sent: Friday, April 11, 2008 10:17 AM
To: time-nuts@febo.com
Subject: Re: [time-nuts] Trimble Palisade connector
You might try tiger-tech.biz. I
, 1PPS pins and
Power.
Don Mimlitch
[EMAIL PROTECTED] wrote:Date: Thu, 10 Apr 2008 10:38:54 -0700
From: "Robert Berg"
Subject: [time-nuts] Trimble Palisade connector
To: "'Discussion of precise time and frequency measurement'"
Message-ID: <[EMAIL PROTECTED]@po
I'm looking for the connector for a Palisade receiver. Had no luck with the
supplier suggested by Deutsch.
It's a Deutsch MMP 21C-2212P1 (12 pins), aka "Standard GPS Interface
Connector." I know these are difficult to find. Does anyone have one?
Bob
WA7ZRX
__
11 matches
Mail list logo