That's a good hint. Thanks!
John
Scott Mace said the following on 03/16/2008 09:31 PM:
I have experimented with several of the RFG units and found that
the XOs will not clear the fault light if the OCXO has drifted
too far. I was able to manually trim them and they worked well
again.
N8UR [EMAIL PROTECTED]
To: Tom Van Baak [EMAIL PROTECTED]; Discussion of precise time and
frequency measurement time-nuts@febo.com
Sent: Saturday, March 15, 2008 3:21 PM
Subject: Re: [time-nuts] Wanted to buy or borrow -- RFTG-m-XO L106A
I'm not sure what's going on. I ran my XO/RB pair for 30
: Re: [time-nuts] Wanted to buy or borrow -- RFTG-m-XO L106A
SNIP
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
Van Baak [EMAIL PROTECTED]; Discussion of precise time and
frequency measurement time-nuts@febo.com
Sent: Saturday, March 15, 2008 3:21 PM
Subject: Re: [time-nuts] Wanted to buy or borrow -- RFTG-m-XO L106A
I'm not sure what's going on. I ran my XO/RB pair for 30 days, using
the official
I have experimented with several of the RFG units and found that
the XOs will not clear the fault light if the OCXO has drifted
too far. I was able to manually trim them and they worked well
again. Perhaps a similar problem with your RFTG.
Scott
John Ackermann N8UR wrote:
I'm not
I suspect the XO module in my RFTG setup is defective, so I'd like to
find another one. It needs to be the L106A (not B) version to mate
with my -RB (L105A) unit.
Anyone have one they'd like to sell? Or, failing that, one I could
borrow to test in my system?
Thanks!
John
[EMAIL PROTECTED]
I suspect the XO module in my RFTG setup is defective, so I'd like to
find another one. It needs to be the L106A (not B) version to mate
with my -RB (L105A) unit.
Anyone have one they'd like to sell? Or, failing that, one I could
borrow to test in my system?
John,
Interesting, my RFTG
I'm not sure what's going on. I ran my XO/RB pair for 30 days, using
the official interconnect cable with the monitoring software
indicating no problems. I took phase data from the RB output via the
TSC and fed it into Stable32 (by the way, with a 20 second timeout, the
30 day TSC data capture