From: Bob Camp
To: Discussion of precise time and frequency measurement
Sent: Sat, August 14, 2010 7:05:35 AM
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser project?-
Heathkid
Hi
This isn't my design originally. The 620 oh
fference).
>
> And finally... *what* should the input/output connectors be? Thanks again!
>
> 73 Brice KA8MAV
>
>
> - Original Message - From: "Bob Camp"
> To: "Discussion of precise time and frequency measurement"
>
> Sent: Friday, Au
ce).
And finally... *what* should the input/output connectors be? Thanks again!
73 Brice KA8MAV
- Original Message -
From: "Bob Camp"
To: "Discussion of precise time and frequency measurement"
Sent: Friday, August 13, 2010 5:34 PM
Subject: Re: [time-nuts] What
Hi
Shortages... what shortages :)..?
The two offending resistors have been "bumped" to 1% standard values from 5%
standard. Functionally there should be no difference at all.
Sorry for the delay in getting it up dated.
Bob
On Aug 13, 2010, at 1:47 AM, Heathkid wrote:
> Hello everyone.
7,868 8/16/2010
John K1AE
-Original Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf
Of Heathkid
Sent: Friday, August 13, 2010 1:48 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] What's the latest correct P
ginal Message-
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf
Of Heathkid
Sent: Friday, August 13, 2010 1:48 AM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] What's the latest correct PICTIC II Mouser project?-
Heath
Hello everyone. I received my six (6) PICTIC II PCBs which are absolutely
beautiful (after a couple minutes of standard cleaning with a pencil eraser
which I do anyway to *any* PCB* I order) and I was getting ready to place my
order for the components tonight but the following (in the "latest p
