Usually bricks are good for at least a few MHz either side of the sweet spot. There's little incentive for the manufacturer to install an expensive crystal filter. I'd just sweep it by hand with an 8640B or something like that, to verify the frequency and power levels it wants to see.
BTW, I have my complete HP 3048A outfit up and running now. More than happy to measure anything you want to send up here, assuming I have a reference to go with it. (That goes for anyone else on the list.) That would give you some extra confidence in the measurements you make with the 7.6 GHz brick, if nothing else... -- john, KE5FX > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Matt Ettus > Sent: Monday, April 28, 2008 4:29 PM > To: [EMAIL PROTECTED]; Discussion of precise time and frequency > measurement > Subject: Re: [time-nuts] Zeta Labs X76 Multiplier 7600 MHz Output > Model5856-01 > > > Thanks Rick. My main reason for buying this is to be able to better > measure the phase noise of my 100 MHz oscillator. I figured this > would give a truer measure than a brick since there is no PLL > involved. But then I thought there might be too much filtering going > on. If the filters are at least several MHz wide, then it should be > fine, but if there is a 100 MHz crystal filter in there, then it won't > really give me a true measure. > > What do you think? > > Thanks, > Matt > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.