>Message: 1 >>From: [EMAIL PROTECTED] >Subject: [time-nuts] Oscillator Hookup >To: time-nuts@febo.com >Message-ID: <[EMAIL PROTECTED]> >Content-Type: text/plain;charset=iso-8859-1
>Hi everybody! I've got a bit of a mystery to solve; > I was wondering if you have run in to an Agilent Crystal Oscillator p/n >10811-60168 before. This model is not the customary 10811 a/b device I >have seen on the Internet. It has the exact same case as the 10811 a/b but >a different interface PCB terminated with a "pig tail" and a little 6 pin >amp fem connector attached. I am pretty certain that it is the same as the 10811-60120. This one has the following connections: Brown wire: 12 volt return Red wire: +12volt (Osc AGC) Orange wire: 12 volt return Yellow wire: Oven Monitor Green wire: Oven Positive(+12V TO +30V) Blue wire: Oven Negative On the board, there should be 2 micon connectors. They are as follows: J1 EFC (-5V to +5V) J2 10 Mhz Output Chuck Norton _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts