[time-nuts] Both 5370B's Sold

Regards, Perrier ___ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com and follow the instructions there.

[time-nuts] Control and monitor program for Spectracom 8195B

I got in an 8195A and managed to get Heather working with the wonky, very much not computer friendly, Spectracom interface and command set. When you send a command to the device it echoes back the characters. This is very useful for telling what command the device is responding to. But,

[time-nuts] HP 5370 A's & B's FS

Yo Bubba Dudes!, Since we're moving 2,200 miles I need to lighten the load a bit. 5370B works, fair condition    $300 5370B Has +15V PS fault. Comes with 5370 extension board kit. $300. Both have HP 10811 osc. that works. 5370A Goes through start up but stops.  Missing one input/ pot +knob also

Re: [time-nuts] 5370B input board

Jim Not aware of any work. I did a hack as I recall on one unit. That was a ecl inverter biased linearly etc. Serious hack. (Some would say ugly) But if its dead, its dead nothing to loose. That chip is actually pretty complicated. As I recall the threshold setting is handled in the chip. Can more

Re: [time-nuts] 5370B input board

Hi Pretty much the same “no” as on the input circuits on the 5335 …. ( best to avoid +5V on a 5335 input with the attenuator set to 1X ….) Bob > On Jul 29, 2019, at 7:42 AM, Jim Palfreyman wrote: > > So that's a "no" I'm guessing. > > :-( > > Jim > > > On Sun, 21 Jul 2019 at 17:38, Jim

Re: [time-nuts] FSA3011 Frequency Stability Analyzer

Hi There are a lot of “stock” programs out there that will handle this sort of “wrap” process. The obvious gotcah is porting them to accept the output of the device. Bob > On Jul 29, 2019, at 5:35 AM, tim...@timeok.it wrote: > > > Hal, > > I thank you for the answer, but I'm not a

Re: [time-nuts] 5370B input board

So that's a "no" I'm guessing. :-( Jim On Sun, 21 Jul 2019 at 17:38, Jim Palfreyman wrote: > Hi All, > > Has there been any advances on the failing chips (5088-7061/5088-7062) on > the 5370B? > > Jim > > ___ time-nuts mailing list --

Re: [time-nuts] atomic/chemical THz sampler / ZCDs

thanks all for the interesting  answers on that one. and the notes on ZCDs was most useful. On 29/07/2019 ___ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com

Re: [time-nuts] FSA3011 Frequency Stability Analyzer

Hal, I thank you for the answer, but I'm not a scientist like many of you but just an amateur so I'm not able to do what you suggest. Unfortunately I need a plug and play tool without post processing. Luciano www.timeok.it Da "Hal Murray" hmur...@megapathdsl.net A

[time-nuts] WWVB Receiver

Here I found a complete "dead bug" style WWVB receiver project from 2017 on YT. #0001 WWVB Receiver Project - Part 1 https://youtu.be/zD_INHy3BBI Donald Resor N6KAW ___ time-nuts mailing list -- time-nuts@lists.febo.com To unsubscribe, go to