[time-nuts] HP5370A vs B version

2019-07-30 Thread Mark Sims
Once upon a time, I looked into the front ends of the 5370 counters (mostly 5370A) and found that it was practical to build a replacement using modern chips. I then lost interest in the project when I found an Ebay seller with a lot of 10 pieces of the 5370A chip for dirt cheap (sorry, all

Re: [time-nuts] HP5370A vs B version

2019-07-30 Thread Tom Van Baak
There was an informative thread back in 2005 on the topic of hp 5370A vs. 5370B: https://www.febo.com/pipermail/time-nuts/2005-April/018053.html It's worth reading the entire thread, or at least, read the reply by JJ (from Agilent T):

Re: [time-nuts] FSA3011 Frequency Stability Analyzer, HP 8405A or TAPR TIC

2019-07-30 Thread Magnus Danielson
Hi, If you sample continously and decimate the data properly you avoid the dead-time issues and get results which is translates well into ADEV measures. Cheers, Magnus On 2019-07-30 14:30, Bob kb8tq wrote: > Hi > > The 8405 is a fine device and with working probes can be very useful to have >

Re: [time-nuts] Control and monitor program for Spectracom 8195B

2019-07-30 Thread Taka Kamiya via time-nuts
Yes, I noticed there was an instructions on setting the range of OCXO's high and low, so it falls within "correctable" range of the PLL.  I bet many GPSDO has something like this - just not explained so explicitly in manuals. Can we try sending the .exe again?  I think if you zip up the below

Re: [time-nuts] FSA3011 Frequency Stability Analyzer, HP 8405A or TAPR TIC

2019-07-30 Thread Wes
I have an 8405, fortunately in excellent condition, along with the BNC adapters, the resistive splitter and the 50-ohm line samplers.  The probe tips are very delicate and are probably unobtainium these days.  The electronics in the probes can be repaired.  I've been careful with mine and had

Re: [time-nuts] FSA3011 Frequency Stability Analyzer, HP 8405A or TAPR TIC

2019-07-30 Thread Bob kb8tq
Hi The 8405 is a fine device and with working probes can be very useful to have around. Without the probes .. not so much. Since they have been around since the 1960’s, the probes may have seen quite a bit of wear and tear. For comparing standards, an RPD-1 and a DVM will kind of / sort of do

Re: [time-nuts] FSA3011 Frequency Stability Analyzer, HP 8405A or TAPR TIC

2019-07-30 Thread tim...@timeok.it
Hi Perrier, The HP8405A is an analog vector analyzer that allows you to make phase measurements like the oscilloscope with Lissajous shapes. This method is the simplest one but allows quite approximate measurements and does not give you a complete view of stability (Allan Deviation).

[time-nuts] FSA3011 Frequency Stability Analyzer, HP 8405A or TAPR TIC

2019-07-30 Thread Perry Sandeen via time-nuts
Yo Bubba Dudes!, I've been following the discussion of the FSA3011 with great interest. Now I'm not in the upper levels of TN esoteric knowledge or have a burning desire to ever get there.   After seeing some small reference somewhere I looked at the HP 8405A on ebay and the price range seemed