> If I plug a thumb drive into a connector, I get a different USB hub than
I get
> when I plug a GPS mouse into the same connector.
I assume you are using MS-Windows.
Maybe have a look with a USB tree viewer.
https://docs.microsoft.com/en-us/windows-hardware/drivers/debugger/usbview
The 2
After all my noise about the FT232R polling at 125 microseconds, I thought I
would see if I could make a hanging bridge. To my surprise and annoyance, it
was polling at 1ms.
I screwed around for a while but couldn't get it to work on the hardware and
kernel that it was plugged into.
I
:-)
Thanks for sharing this Corby,
Much appreciated!
Best Regards
Ulf Kylenfall
___
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the instructions
Luciano,
Hi I understand your A9 is the older version like the one in my post but
with the original opamp module.
I tested the 5065A with an unmodified and then one with the LH156H
mounted and the 24 Hour phase plots were both clean and the AD were the
same.
My lab is not climate controlled
Hi Jim,
On 7/16/20 1:37 PM, Jim Palfreyman wrote:
Anyone here have experience with White Rabbit products? Any thoughts would be
appreciated.
Got to play with it extensively, using it to connect various radio
telescopes together. There is a lively community around the White Rabbit
project,
Anyone here have experience with White Rabbit products?
Any thoughts would be appreciated.
Jim
___
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow the
Hi Corby,
in my HP5065A is mounted the old card with discrete components. Can you tell
me if there are differences about the final performances of the 5065 using the
two different versions?
Luciano
Luciano P. S. Paramithiotti
tim...@timeok.it
www.timeok.it
Da