Joe Polastre wrote:
Are you using TelosB or Tmote Sky?
The Moteiv Oscilloscope application in Boomerang has detailed
information about how to decypher the Oscilloscope readings in
README.TmoteSky in /opt/moteiv/apps/Oscilloscope
I'm using a TelosB. Now crossbow refers me to this community
Hi. I'v already been using MicroTimer and in my experiment, the sampling rate can only reach 2kHz. If the frequency of timer is higher, ADC rates doesn't keep on with the timer. So I deployed ADCControl.setSamplingRate(TOS_ADCSample60us). But I got no effect? (The ideal clock rate
we need is
Hello all,
I have written a simple application in which I called
TimerJiffy.setOneShot(11).
The command is getting called,( I have checked the return value of the
command, it is SUCCESS), but the event TimerJiffy.fired ( )doesnt seem
to be getting fired.( I have put an led in the event and it
Title: Messaggio
Dear
all
I am currently
developing an application which at every defined interval of time (say 1 minute)
take sensor measurements and write on the EEPROM.
In the mean time the
application elaborate the data and every 1 hour should send an average of the
data to BCAST.
Hi, I'm currently working in an application in JAVA that shows the data comming from the serial port. The problem is that I don't know why my tinyos didn't have the javax.comm files so I'm unable to compile the application.
Any suggestions or help please? I attach the toscheck information...
Hi,
Anyone knows how to change the frequency used by tmotes by using a
command or modifying the configuration options.
Thanks, regards,
Joan
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
You can configure it with the component CC2420Control in
C:\cygwin\opt\tinyos-1.x\tos\lib\CC2420Radio
BR,
Diego
- Original Message -
From: Joan Cortes [EMAIL PROTECTED]
To: tinyos-help@Millennium.Berkeley.EDU
Sent: Tuesday, May 16, 2006 1:17 PM
Subject: [Tinyos-help] Change
Hello. i'm tryig to use power tossim for cc2420 but i don't really know
how to do it. I know that in the cvs repository there's a carpet tossim
cc2420, but i don't know how to do it, or how to install it. Could
anybody help me? thanks a lot..
___
Hi all,
We have micaz motes. We have installed TinyOS 1.1.7. We have bought a
temperature sensor, whose data is measured through a duty cycle. Then we
need a clock to measure it. We have write an application and it compiles
right, but the micaz mote does not work. We have tested that the
On May 16, 2006, at 2:11 AM, Adesola Omotayo wrote:
Hello,
Kindly enlighten me about the differences between the Receive and
ReceiveMsg interfaces. When can I use the Receive interface and
when can I use the ReceiveMsg interface? What indicates which one
to use?
ReceiveMsg is (in theory)
Thank you for the explanation!
Adesola
-Original Message-
From: Philip Levis [mailto:[EMAIL PROTECTED]
Sent: Tuesday, May 16, 2006 8:45 AM
To: Adesola Omotayo
Cc: tinyos-help@Millennium.Berkeley.EDU
Subject: Re: [Tinyos-help] Differences Between Receive and ReceiveMsg
Interfaces
On May
Hi All,Iwant to useMOTE-VIEW-1.2/mica2/XMDA300 to collect data from my analog sensor. However, I want to inteprete adc0 field differently. I mean, I want to convert that voltage to some other engineering unitfor my sensor. e.g I want to multiply the voltage reading in adc0 field by ,say, 2 and
Title: Message
Hi
Vinayak,
Have
you managed to make any progress with enabling the hardware security on the
CC2420? We're thinking about implementing TinyOSCC2420 hardware
security here, and looking for anycurrent developments anyone may have
available.
Thanks,
-David
Hi all,When i try to follow the Deluge-manual and run DelugeBasic to ping the node it says : Exception in thread "main" java.lang.NoClassDefFoundError: net/tinyos/tools/Deluge. There are some pages on the help-list but it did not solve my problem. Any suggestions ??-Bhushan
Yahoo! Messenger
The probem is that i have the files in beta/TOSSIM-cc2420 directory but
when i do the make pc sim,telos i get a lot of mistakes that told that
the most of the componente(cc2420RadioC interfaces, cc2420Control
commands,) are not found. Anybody has any idea where is the problem?
I have to copy
Hi
I am trying to upgrade from tinyos version 1.1.0 to version 1.1.15. I am
using Windows XP.
I have done the following.
First upgraded cygwin, and then installed the
tinyos-1.1.15Dec2005cvs-1.cygwin.noarch.rpm.
When I run toscheck, there are no errors.
I am able to compile the apps for mica2.
Your msp430 tools are out of date and, as the error message indicated,
do not support the msp430x1611 microcontroller.
-Joe
On 5/16/06, Chiu C. Tan [EMAIL PROTECTED] wrote:
Hi
I am trying to upgrade from tinyos version 1.1.0 to version 1.1.15. I am
using Windows XP.
I have done the following.
Well, again, it's only my opinion. But I doubt that any simple
open-loop thermistor or CDS cell is particularly linear or
repeatable from device to device. However I am often mistaken...
In any case I would set up the sensor in a known environment
like the one I eventually want to measure, let
Install the javax.comm package in your JRE then
I have squirreled away a copy at:
http://www.etantdonnes.com/TMP/javacomm20-win32.zip
It has instructions for installation.
MS
Daniel Villón wrote:
Hi,
I'm currently working in an application in JAVA that shows the data
comming from the
Hi Joe
Do you know where I can get the latest msp430 tools?
I have tried getting them from tinyos 2.0, but when I try to install
msp430tools-binutils-2.16-20050607.cygwin.i386.rpm
I get this error
unpacking if archive failed on file
/usr/local/mspgcc/bin/nsp430-strip.exe
I have also
Title: Messaggio
Dear
all
I find
myself the solution!
It was
just a problem related with the array's size declaration for the LoggerWrite to
Append.
How
this can affect the Send process? I am really fancy to know.
Thank
you for your interest.
Franco
Di Persio.
-Messaggio
Good work...
I believe the EEPROM and Radio both use the I2C mechanism
so there may be some conflict there. Don't know why a buffer
size would be significant though...
MS
Franco wrote:
Dear all
I find myself the solution!
It was just a problem related with the array's size declaration
I am trying to change SimpleCmd to fit with Boomerang distribution. I still
do not understand well with SPC. Should I just replace Bcast to SPC? Please
give me some advices. Thanks.
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
I've been reading through some documentation and I can't tell what type of
data link layer protocol is being used in TinyOS 1.1.10. Is it B-MAC, S-MAC,
or just plain MAC? Also I can't seem to find a diagram that shows how many
bits the preamble is, the sync is, the payload, etc etc. Does
Thanks a ton,
Its working now, I think this thing shuold be documented so that
others will not err.
regards
jagan
On 5/16/06, Cory Sharp [EMAIL PROTECTED] wrote:
For and instance of TimerJiffy, use unique(TimerJiffy) not
unique(Timer). - Cory
On 5/16/06, jagan nath [EMAIL PROTECTED] wrote:
Hi all, I am working with SimpleCmd and TosBase. I programmed the motes as in the tutorial but it gives me write failed everytime i try to inject a packet. I made sure that the baud rates are the same and glanced through other material poested on the same problem but nothing solved the error. I
26 matches
Mail list logo