[Tinyos-help] Attaching sounder component to tmote sky?

Hi, Has anyone here successfully attached a sounder component to a tmote sky mote? What did you do? I would like to be able to use the sounder interface like I once did with the mica2 motes. Thanks. ___ Tinyos-help mailing list Tinyos-help@Millennium.

[Tinyos-help] Tmote Sky Installation Problems

Hello, I ran into this make error when trying to compile Delta onto the tmote platform: "tmote ident_flags tos_image bnp" does not specify a valid target. Stop. I double checked my environment variables such as TOSROOT, TOSDIR, etc. I don't know what I am doing wrong here. Thanks. _

[Tinyos-help] How to get tmote sky working.

Hi, We are currently running on the mica2 platform and would like to upgrade to tmote sky. There doesn't seem to be any good documentation (tmote's site contains dead links to zip files) for how to upgrade to this platform. We are running Windows XP by the way. What software tools do we need to

RE: [Tinyos-help] SounderControl.start()

I found out the issue. I had another instance of the sounder interface running on another component. Thanks. -Original Message- From: Tarun Bansal [mailto:[EMAIL PROTECTED] Sent: Tue 2/13/2007 12:52 AM To: Conard, Andrew Cc: Tinyos-help@millennium.berkeley.edu Subject: Re: [Tinyos-help

[Tinyos-help] SounderControl.start()

Hi, I was wondering how this method works exactly. When called once, is it only supposed to "chirp"? Or when you call it, does the sounder stay on until the SounderControl.stop() is called? For some reason, we have a program where the sounder is supposed to stay on for two seconds once a timer

[Tinyos-help] MoteView not working again.

Hi, Recently I reinstalled MoteView with a newer version and everything was working fine. All of the sudden, today, this software is just not working for me anymore. I am using the Mica2 platform. I can see the XMeshBase_433_hp mote blinking its green LED and the M310 mote blinking its yellow L

[Tinyos-help] Mica2 Mote RF Power

Hi, I was wondering how to check the current RF power on a Mica2 mote? It seems each mote has a different RF power. For a demo program I am making, I need every single mote to have the exact same RF power. Does it also have to do with the batteries that are on the mote as well? Thanks. ___

[Tinyos-help] Why won't the Mica2 receive messages from certain motes?

Hi, I have a simple demo program in nesC where: a) A "starter" mote, upon detecting a dark value, broadcasts a message. b) A "router" mote, upon receiving this message, forwards the message (broadcasts it as well) and lights up the green LED. c) A "base" mote finally receives this message and li

[Tinyos-help] MoteView -> Changing voltage levels on the fly?

Hi, First of all I am sort of new to MoteView and its capabilities, so bear with me... I am supposed to set-up a MoteView demo for high school students. One thing I would like to show is how the voltage levels of the motes can affect the network topology (because if one or more motes' voltage

[Tinyos-help] Works in TOSSIM but not on the actual motes?

I've compiled an application successfully and it works fine on the simulator (using the main.exe from the pc build). When I put the same program onto the motes, now it's not behaving properly. Is there any reason why this would happen? I am using the mica2 platform.

[Tinyos-help] MoteView is not working.

Hi, I'm trying to get MoteView to sample data from a XMTS310 sensor board. I am working with the Mica2 platform. I am able to program the base mote with the base program with an id of 0. I am able to program another node with an id of 1 using the XMTS_310_433_hp image. I then connect to the da

RE: [Tinyos-help] TOSSIM and TinyViz

I am experiencing a similar problem except my app stops running after about 100 seconds usually (with 3 nodes). With 4 nodes, it stops running after about 30 seconds. I'm pretty sure it isn't because of my software but then again you never know. When I load the program onto the hardware, it keep

[Tinyos-help] Motes on the grid lighting up on the simulator -> already possible?

Hi, I finally got the TOSSIM running on my computer today. For our project, we are looking for a way to see the LED lights come on on different motes within the grid of the simulator program. I know that you can have LED debug messages come up such as "[0] Green LED on.", but I would like to be

RE: [Tinyos-help] Tutorial 4 question

Hi, The base station simply prints out packet information for any messages it receives. So you have to have another mote nearby that sends messages. Make sure the motes are fully charged and that the base station is still placed on the serial programming board (assuming that you are using the m

[Tinyos-help] Telos Deluge Problems

Title: Telos Deluge Problems Hi, I am able to run the Telos Deluge java application just fine. I get to the part where it says "Pinging node ..." but then it just sits there. Nothing happens. I notice that the receive lights on the telos mote comes on but the transmit lights never come on. A