:04 AM, Arik Sapojnik sapoj...@gmail.com wrote:
The command is *re*install.
You can use it with the same syntax as install.
Instead of compiling the image again, it loads the ready bin file.
Arik
On Tue, Apr 27, 2010 at 03:28, Group mailforgr...@gmail.com wrote:
Hi,
I'm just wondering
Hi,
I'm just wondering if there is any command to directly load the image on
TelosB mote.
I would like to skip the compilation part as it is taking lot of time. I
tried executing the
command found in 'make telosb install.1' execution output.
Something like this..
$tos-set-symbols --objcopy
Hi,
I have some basic question on running MultihopOscilloscope.
I have 3 motes. One connected to PC with moteID 1 and other
two with moteids 2,3 are powered with battery. All of them have
MultiHopOscilloscope running. When i ran sf and oscilloscope
application on PC by following commands in
:
On Mon, Dec 7, 2009 at 12:23 AM, Group mailforgr...@gmail.com wrote:
Hi,
I have some basic question on running MultihopOscilloscope.
I have 3 motes. One connected to PC with moteID 1 and other
two with moteids 2,3 are powered with battery. All of them have
MultiHopOscilloscope running
Hi,
I'm using tinyos-2.x on telosb mote and sensirion component to get the
temperature readings. Values are in the range of 6400-6600 integral values
at
room temperature. Is there any conversion formula to convert these readings
to
degree celsius. I looked through the crossbow datasheet but could
Hi,
I'm running TinyOS-1.1.11 on TelosB mote. I'm writing an application to get
Temperature
Sensor readings. For this i'm using Sensirion component as its mentioned in
Crossbow
telosb data sheet. I'm reusing the code present in
apps/MicaWBVerify/TestHumidity.
But i'm getting the error as:
Hi All,
I have three TelosB motes. One mote connected to PC, acts as a Base Station.
Other two motes sends the messages (normal TOS header + one byte field for
the TOS_LOCAL_ADDRESS) to base station. When base station receive the
messages it displays on the PC (used Listen.java for this). When i
Hi,
I tried running the Sense application on Telosb mote. I have tinyos-1.x.
It was mentioned that LEDs to be off when the node is in the light,
and on when the node is in the dark
but the mote is glowing green led continuously even in dark and light.
Can any one of you tell me how can i check
Hi All,
I'm still struck up with this issue. Do we need to compile any code to enable
Debug/Radio model options in TinyViz. Please help.
Thanks,
Rao
On Sat, Jan 31, 2009 at 6:39 PM, Group mailforgr...@gmail.com wrote:
Hi All,
I have successfully installed TinyOS-1.x on my vista machine. I
Hi All,
I have successfully installed TinyOS-1.x on my vista machine. I ran
the Blink application on TinyViz (using 'tinyviz -run
build/pc/main.exe 2' command in opt/tinyos-1.x/apps/Blink directory)
and it was running perfectly. When i enabled Debug Messages and Radio
Model options on TinyViz,
Hi,
I'm new to this group. I would like to use TinyOS 1.x TOSSIM
simulator. From where can i download the link. I would like to run
TOSSIM on UBUNTU 8.10 running on VMWARE player. I have looked through
tinyos.net site but unable to find one. Please help me out in this
regard
How *tinyos* and *cygwin *can be used with ARM processor ???
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
How tinyos can be used with ARM processor ???
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
13 matches
Mail list logo
