[Tinyos-help] a pplication for sensing and connecting to pc to

Hi Is there any tinyos application for Telosb. Which combined sensing and Tobase applications, I need to program Telos which is connected directly to the PC and sense environment, no wireless transmission _ << ella for Spam Control >> has removed Spam messages and set aside Newsletters

[Tinyos-help] more than one timer in the same module file

Hi Can I use more than timer in the same module file such that they are initialized and fired at different times? Moreover , can I attach the time with channel status, for example if channel status is busy I will stop timer and start it again when the channel becomes idle I hope some one

[Tinyos-help] RE: Running SurgTelos from UCB

Hi I try to run the SurgeTelos application from ucb, I programmed four Telos motes with the surge application. The ids of the telos are 0, 1, 2 ,3 . I attached the Telos -0 to the PC, the other three Telos are distributed randomly very close the PC (less than 10 m), I made the necessary modi

[Tinyos-help] Running SurgTelos from UCB

Hi I try to run the SurgeTelos application from ucb, I programmed four Telos motes with the surge application. The ids of the telos are 0, 1, 2 ,3 . I attached the Telos -0 to the PC, the other three Telos are distributed randomly very close the PC (less than 10 m), I made the necessary modific

[Tinyos-help] new to tinyos and Telosb

I am new for Tinyos, I want to use a Telosb module (from crossbow) to build a test bed for different applications, I download the Tinyos, I want to configure the Telosb to communicate with others, actual I do not know how to start, I read the Telosb manual. I read the WSN -getting Started Guide

[Tinyos-help] Programming Telosb

I try to program the Telosb according to the steps in the file : QuickStartGuide_7430-0380-01_A.pdf Every thing is ok until the third step "Program TPR2400/2420 Mote" , when running the command : make telosb reinstall, bsl , The error message is Could not open port: < 2, 'CreateFile', 'th