Hi there,
According to the TinyOS tutorial 1.x, group id of motes can be specified
in the makerule file and accessed via variable (uint8_t TOS_AM_GROUP).
Currently, I'm experimenting the dynamic group id assignment rather than
at the compile time. However, the system didn't allow me to assign n
HI there,
I started looking into TinyOS+nesC a few weeks ago. I'm trying to
implement some node fault management and group formation management
functions / middleware service which is on top of TinyOS.
For example: how could I define my own message format / datatype;
These example applications
HI there,
When we tried to run the autorun programme as mentioned in TinyOS
tutorial, it gave us 'the application has failed to start because
cygwin1.dll was not found, re-installing the application may fix this
problem'. We reinstalled the cgywin. The error still remains. Is there
anyone can
Hi there,
Has anyone there had any experience of using 'TOSSIM' simulator which
comes along with the TinyOS under the xbow folder?
The TOSSIM simulator window will automatically disappear after I run the
'tinyviz -run build/pc/man.exe 30' command as mentioned in the lesson 5
of the tutoria
HI
We are also having a
problem with Surge_Reliable demo and are getting the same warnings as Kim
(http://mail.millennium.berkeley.edu/pipermail/tinyos-help/2004-June/004310.html).
We are hoping if Kim would be able to guide us as how to make it work.
Thank you in advance.
mengjie
Hi there,
When I test programming a Mote with MIB510 programming
board by using the Blink application, I accidentally downloaded the Blink application
into the MICA2 Mote which belongs to the base station (marked with Base_433_0).
After that, the D2 light on both MIB510 board and MICA2M
Hi there,
Just a quick question.
After I set up the sensor network by using CROSSBOW
Mote-Kit, the MTS310CA nodes can be easily discovered by the MIB510 base
station and showed on the GUI interface. However, there is no sign of another
two MTS510CA even after I waited for a while.
Hi there,
I just started to set up my Mote-KIT. I followed the instruction
as described in ‘Getting Started Guide’ manual. Unfortunately, I
didn’t see anything showed in the Surge GUI even after I waited for a
couple of minute. I only connected the MIB510 sensor board (attached with MIC
