[Tinyos-help] Alerts in MoteView

Hello, I'm trying to configure alerts in MoteView. I've created some alerts that watch voltage and i've made all the combinations I've remmembered of (>0, <0, Pop-up, Send E-mail, 10 Minutes, 1 Minute, etc, etc). However none of them works! Does the alerts stay active rigth after I configure

[Tinyos-help] ID's in MoteView

Hello, Can you tell me if is there a way to configure micas's id's so that I can save the real value that I've configured in a mica? For example, if I configure a mica2 with id=2 it is saved in mts420_results like 258 (id = 256 + id_mica). All the other sensor's values are saved correctly. T

[Tinyos-help] Batteries problem...

Is that any way I can power down the GPS module of MTS420 so that I can still work with MoteView using AA batteries? I really would like to use MoteView because it builds up all the DB for me with PostgreSQL. I can use SurgeView and put it in a log file but then I have to build the DB with that

[Tinyos-help] Batteries problem...

Hello, I've told you i'm using XSensorMTS420 but it was a mistake of mine. I'm realy using XMTS420_903_hp.exe and XMeshBase_903_hp.exe. So that's not the problem. The mica2's I have are MPR400CB with two batteries AA. I thing I can't change mica2's power so I have to go another way. Before XMes

[Tinyos-help] MoteView

Hello, I have a mica2 with XSensorMTS420(id=1) and another with XMeshBase(id=0). If I put MTS420 directly in MIB510 with id=0 it apears like Gateway and I can see it's data. But with XMeshBase Moteview don't receave anything. The MTS420's leds toggle (both red and green) but XMeshBase seams lik

[Tinyos-help] Help with MoteView

Hello, I'm trying to see data from micas in MoteView. I can see it from the mica2 that communicates with gateway. However i can't see the link that should connect the mica2 node with the mica2 gateway. I'm using XSensorMTS400 with id 11 and TOSBase with id 0. Can you tell me why? Thanks Cat

[Tinyos-help] XSensorMTS400 error

Hi there, I'm trying to put a XSensorMTS400 communicating with a TOSBase. I saw Sam Al's post at May 24, 2004 where John Sub say the problem it's a conflict between a Makelocal and the MakeXbowlocal. I did what he said to fix the problem including to change the TOSBase's Makefile to COMPONENT=