Hi,
the most common instances of this happening were when
1. the mote was switched off (turn it on)
2. the programmer switch on the programmer was set to on (set to the off
position)
3. the port was being used by a different application (on windows i close
all applications, labview, hyperterm
Hello all. I met problem in tinyos-1.x when I try to install Blink in
the contrib/xbow/apps directory onto MIB510 board. The error is below:
-
mkdir -p build/micaz
compiling Blink to a micaz binary
ncc
Some other possible causes to check: 1. Make sure your serial cable or whatever cable you are using is firmly secured to the computer. If it gets loose you get the error. 2. Make sure no other applications are using the serial port for communications. 3. It's well powered. Those are some the
essage -From:raj rajTo: tinyos-help@Millennium.Berkeley.EDU Sent: Tuesday, July 18, 2006 9:11 PM Subject: [Tinyos-help] "Programmer is not responding" error Hi all,I
searched the archive for this problem andtried all those suggestions. But still having
Are you able to use your serial port at all under Cygwin?I've found that using something like Hyperterminal to open and close the COM port under Windows before trying to use it in Cygwin clears up any problems.
As for USB-Serial adapters, I haven't had any luck with them. - ConorOn 7/18/06, r
-Networks.htm
Start reading at page 11.
- Original Message -
From:
raj raj
To: tinyos-help@Millennium.Berkeley.EDU
Sent: Tuesday, July 18, 2006 9:11
PM
Subject: [Tinyos-help] "Programmer is not
responding" error
Hi all,I searched the archive for th
Hi all,I searched the archive for this problem and tried all those suggestions. But still having this problem. So, please somebody help me.I have been installing different applications on my mica2 mote without any problem for quite some time. Then all of a sudden, yesterday when I tried to install
