Andres gave me the answer…
We should use ,/dev/ttyS0
and not com1 when we write the
command under cygwin
I think the file where /dev/ttyS0 = com1 has been
changed but I don’t know what is it?
Thanks for help
Sincerely
Matt
_
This can't be the problem, because the Programmer LED does glow when I
specify the port name.
Were you able to program the motes with /dev/ttyS0 etc?
Sankar.
On Wed, 12 Jul 2006 09:44:39 -0500, goetgheb <[EMAIL PROTECTED]>
wrote:
Andres gave me the answer.
We should use ,/dev/ttyS0 and
[EMAIL PROTECTED]
Envoyé : mercredi 12 juillet 2006 19:25
À : goetgheb; tinyos-help@millennium.berkeley.edu
Objet : Re: [Tinyos-help] Cygwin problem
This can't be the problem, because the Programmer LED does glow when I
specify the port name.
Were you able to program the motes with /dev/ttyS0
, you have changed your nesc version...
> You should come back with the 1.1.0
>
> See you
>
> Matt
>
> -Message d'origine-
> De: Sankar Gorthi [mailto:[EMAIL PROTECTED]
> Envoyé: mercredi 12 juillet 2006 19:25
> À: goetgheb; tinyos-help@millennium.berkeley.edu
&g
gt; >>> > --> Personnally, I never have modify my nesc
1.1.0 to>> nesc-1.1.2bversion>> > I think it's the problem, you have changed your nesc version...>> > You should come back with the 1.1.0>> >>> > See you>> >
>> >
Hi all,
I am using Xbow usb Mib520 to program the Micaz motes and use cygwin for
it.I use the command make micaz install.1 mib520,/dev/ttyS2
Some times the program gets loaded into the mote but some times the cygwin
hangs with the following message,
uisp -dprog=mib520 -dserial=/dev/ttyS2 --wr_fu
If it sometimes works I would suspect a hardware issue,
loose cable or connector, bad power, etc. I also think
I remember being able to turn on trace messages...yup:
-v Set verbose level (-v equals -v=2, min/max: 0/4, default 1)
or peruse the other uisp options with "--help"
MS
mgm ncm wro
ar
> for loading program i used COM instead of /dev/ttyS2 , kindly try as
> windows require Com, TRY LOOKING INTO IT.
> see on which com port your mote is connected by motelist.
>
> regards
> Yasir
>
> --- On *Wed, 4/28/10, mgm ncm * wrote:
>
>
> From: mgm ncm
>
