hi chris,
i need a driver for the mda300 sensor board in tinyos-2.x. can i get the
driver you have made..
Thanks regards
P. Sowjanya
Member Technical Staff
C-DAC, Hyderabad
email: [EMAIL PROTECTED]
“Give a man a fish a day, you feed him for a day. Teach him how to fish,
you
feed him for his
hi chris,
i need a driver for the mda300 sensor board in tinyos-2.x. can i get the
driver you have made..
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Hi. I need some help from you.
I am a beginner in this TinyOS and nesC thingy.
However, my supervisor requires me to deal with these few components :
MDA300, MicaZ, and MIB520.
As far as i am concern, i am using MoteView to get reading from these motes.
In order to program this MicaZ, i would have
PROTECTED] On Behalf Of zhia
howe chong
Sent: Tuesday, July 29, 2008 2:28 AM
To: Eric Keller
Cc: tinyos-help@millennium.berkeley.edu
Subject: Re: [Tinyos-help] Digital Channels as Output on MDA300CA
Hi. I need some help from you.
I am a beginner in this TinyOS and nesC thingy.
However, my supervisor
I didn't get any response from Chris, and I was wondering if anyone else
could help me use the MDA320/MDA300 digital I/O under Tinyos2?
Eric
On Mon, Jun 9, 2008 at 10:51 AM, Christopher Leung
[EMAIL PROTECTED] wrote:
If you're using TinyOS 2, I made a driver that can control the output of the
Has anyone gotten this driver to work? I need to do digital input, I
assume it's a fairly
easy change from digital output.
Eric
On Mon, Jun 9, 2008 at 10:51 AM, Christopher Leung
[EMAIL PROTECTED] wrote:
If you're using TinyOS 2, I made a driver that can control the output of the
digital pins
If you're using TinyOS 2, I made a driver that can control the output of the
digital pins on the MDA 300 and 320 boards. I made the driver for the Iris
platform but I think it should also work on MICA2. Reply back if you want
driver.
Chris
___
I'm rather new to TinyOS, so my question may seem rather elementary.
I am trying to use the channels D0-D5 on the MDA300CA DAQ board, fitted
with a MICA2, as outputs to control some external switches for powering
some sensors on and off. I haven't been able to find any documentation
or
Xbow has some support in TOS 1.x in:
tinyos*/contrib/xbow/tos/sensorboards/mda300
I don't know if it got to T2 though.
MS
Steve Yazicioglu wrote:
I'm rather new to TinyOS, so my question may seem rather elementary.
I am trying to use the channels D0-D5 on the MDA300CA DAQ board, fitted