Hi TinyOS users!!
Is there a driver to use the MTS400 sensorboard with the MICAz mote? In case
not, how could I measure temperature, light and humidity from this board? I
need some information about it, does the ADC in the sensorboard have an I2C
interface or is it easier than that?
And... I
Hi, can you help me, please? I would like to try to develop a
component to allow MTS400 to work. Is it a decent idea? Where can I
find material about how to do it? I suppose I won't though... is it
the case?
Thanks
--
"The truth shall set you free"
http://www.nerdtests.com/nq_ref.html";>
http:
Hello,
Im using a MICAZ with a MTS400 sensor board. This sensor board has the
following sensors: temperature and relative humidity (Sensirion SHT), light
intensity (TAOS TSL2550D), barometric pressure (Intersema MS5534B) and
two-axis accelerometer (ADXL202JE).
The XML output only provides
I want to use the MTS400 sensorboards that I have but my tinyos version
doesn't contain the mts400 nesC codes. The only sensorboards available at
/tinyos-2.1.0/tos/sensorboards are the ff: basicsb, im2sb, mda100, mts300.
Where can I get the /mts400 folder containing all the necessary nesC codes?
C
, July 08, 2008 8:51 AM
To: tinyos-help@millennium.berkeley.edu
Subject: [Tinyos-help] MTS400
Hi TinyOS users!!
Is there a driver to use the MTS400 sensorboard with the MICAz mote? In case
not, how could I measure temperature, light and humidity from this board? I
need some information about
, July 08, 2008 8:51 AM
To: tinyos-help@millennium.berkeley.edu
Subject: [Tinyos-help] MTS400
Hi TinyOS users!!
Is there a driver to use the MTS400 sensorboard with the MICAz mote? In case
not, how could I measure temperature, light and humidity from this board? I
need some information about it
Hi all,
Is it possible to change the driver of SHT11(Telos) which is in chips of
tinyos2.x to mica2 tinyos2.x.. if so please guide me to wire the i2c switch
to PDATA and SCK in HplSensirionSHT11C. kindly help
--
Regards,
Ashwini
___
Tinyos-help
elps,
Giri
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Luis Ruiz Garcia
Sent: Wednesday, January 30, 2008 5:08 AM
To: tinyos-help@millennium.berkeley.edu
Subject: [Tinyos-help] MTS400 sensorboard
Hello,
I'm using a MICAZ with a MTS400 sensor board. This senso
Hi,
In the directory
(http://tinyos.cvs.sourceforge.net/viewvc/tinyos/tinyos-2.x/tos/sensorboards/)
there are no sensorboard for MTS400?
Can someone please tell that what location is its implementation?
--
Faisal Aslam
University of Freiburg
http://cone.informatik.uni-freiburg.de/people/aslam
Hi,
We got two Mica2s (433MHz) with MTS400 sensor boards and programmed via
MIB520, and tried to use MoteView to monitor the motes.
We now could finish the search, query, program, and reboot without problems
in MoteConfig, the motes could be searched, and XMesh is also set up on the
basestation an
hi all,
we are trying to use the MTS400 application in a micaz mote. we installed
the program & let it talk to a telosb gateway & using the TestSerial
application we displayed the reading on the terminal. but the readings were
incorrect. does anyone have any idea what might have we done wrong?
t
Dear all,
how to off sensor all in MTS400, I just want used of pressure sensor in
MTS400.
Thank for share.
Rony
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
Hi, All: Can anyone help me with the the xbow MTS400 problem. When I receive the packet, the packet length is changing, sometimes is 40 bytes and sometimes is 39 bytes. I found a dump(0xd5) byte is inserted in to message? Can anyone tell me how to make the packet to be accordance, not changin
Hi,
I've been working on a few tinyOS (1.x) projects, and investigating
some of the various tools tinyOS provides. Couple of unrelated
questions I'd like to ask people reading:
1) Does the MTS400 test program accurately report the calibration
data? We've been looking at decoding the pressure rea
Faisal,
When possible, please search the archives of the mailing list before
posting a question. It is very likely that someone has already asked
that question and gotten a response back.
See
http://old.nabble.com/Fwd:-Need-Help-With-TInyos2.0-in-MTS400-Sensorboard-td23702024.html
for more d
Paul,
The old answer is old and pretty useless. Next time please read achieve
yourself before posting your advice.
Faisal
> Faisal,
>
> When possible, please search the archives of the mailing list before
> posting a question. It is very likely that someone has already asked
> that question and
Thank you. That is a very helpful reply.
Faisal
> There's an implementation in tinyos-2.x-contrib/mts4x0.
>
> Janos
>
> On Wed, Dec 16, 2009 at 6:58 AM, Faisal Aslam
> wrote:
>> Hi,
>>
>> In the directory
>> (http://tinyos.cvs.sourceforge.net/viewvc/tinyos/tinyos-2.x/tos/sensorboards/)
>> there
ments?
Giri
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Naomi
Li
Sent: Thursday, August 28, 2008 3:13 PM
To: tinyos-help@millennium.berkeley.edu
Subject: [Tinyos-help] MTS400 in Moteview
Hi,
We got two Mica2s (433MHz) with MTS400 s
Dear sirs;
How to modify the MTS400 for earthquake monitoring, it is mean that how to
modify the MTS400 TinyOS code to high sampling rate. Because the XBOW's
moteview only get lower sampling rate.
Thanks
winton
本信件可能包含工研院機密資訊，非指定之收件者，請勿使用或揭露本信件內容，並請銷毀此信件。
This email may contain confidential i
I have been working on acquiring data with a MTS400 sensor board. I
have noticed that the event chain is a bit different than with the
MTS300 sensor, and that it takes a bit longer for the mica2 to retreive
the data from the sensor.
I have observed that the mica2 takes about 200-500 ms to ret
You may be seeing an 'escape' char that preceeds a 0x7d (I think
that's the value that's escaped). See this for details:
http://weblog.cs.uiowa.edu/294s05-project/uart/slides/deciphering-serial-packets.pdf
MS
Zhengsu Gao wrote:
Hi, All:
Can anyone help me with the the xbow MTS400 problem
Hi everyone.
Can any one tell me how I can use mts400/420 sensorboard in TinyOS2.x? Any
one has an example code?
Thanks,
Mustafa
-
Be a better pen pal. Text or chat with friends inside Yahoo! Mail. See how.
Hi everyone.
Can any one tell me how I can use mts400 sensorboard in TinyOS2.x? I'm using
iris platform.
Thanks,
Xiaojun Zhu
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile
hi,
Currently I am working with IRIS Motes and MTS400 in tinyOS 2.0, but I
cannot find the driver required, do any one know where can I find it. Thanks
very much.
Best Regards
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www
hi,
I just download mts400 driver folder and copied it directly to my tinyOS
/tos/sensorborads/mts400, but now it still does not work. Do I need to do
some additional settings? Thanks for your help.
Best Regards
___
Tinyos-help mailing list
Tinyos-hel
Hi!
On Mon, Oct 3, 2011 at 6:23 AM, li shiwei wrote:
> Dear Miklos
> Thank you, i successfully download tinyos-main folder. But i still got some
> problems to display the data reading using Oscilloscope
> 1 i found the tinyos-main is for tinyos 2.0.1, do you mean i should
> downgrade 2.1.1 to 2.0
Use the latest CVS version, it has the drivers. Miklos
On Wed, Jul 7, 2010 at 7:18 AM, CHEN WEIMING wrote:
> hi,
>
> Currently I am working with IRIS Motes and MTS400 in tinyOS 2.0, but I
> cannot find the driver required, do any one know where can I find it. Thanks
> very much.
>
>
> Best Regard
Hi Chen,
The safest way is to download the whole CVS and use that for your development.
If you cannot do that, then it MIGHT help if you copy the MicaBus*
files from the CVS into your local repository.
Best,
Miklos
On Sat, Jul 10, 2010 at 8:40 AM, CHEN WEIMING wrote:
> hi,
>
> I just download
Dear all,
I am trying to use the application Oscilloscope for the MTS400 sensors in an
TinyOS 2.x environment. Does anyone has the drivers for this platform in this
specific operating system?
Thank you very much for for your help
Rafael Aguilar
___
T
Hello,
I'm using the MTS400 sensor board on top of my MicaZ mote for sampling
ambient light values.
The MTS400 sensor board has a TAOS TSL2550D light sensor.
Do you have any idea what the minimum achievable sampling rate would be?
I'm not able to detect received light distinctly for an on-off key
30 matches
Mail list logo
