I think the 320 is the same basic setup as with the 300. For some reason, I am getting junk values, even when trying different boards. I assume that the MDA doesn't need to be externally powered, and ADC.getData will return a 16bit value 0-65355 corresponding to 0-2.5V. It really seems simple to wire to the ADC control and read from port 0, but I just get values ranging from 0x0130 to 0x01FF which makes it seem like something is not connected properly or there is a power issue.
I am looking for an example of code (preferably sampling at 100Hz or so) which can read from ADC[X]. I want it to be in 1.x rather than 2.x because from what I have read, reading the ADC changed in 2.x. Or, of course, any suggestions on my sources of error would be appreciated. -Matthew Nassr -- Matthew S. Nassr <[EMAIL PROTECTED]> _______________________________________________ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
