[Tinyos-help] Tmote Connect and TinyOS 2.x

Hi! I want to use the Tmote Connect device with TinyOS 2.x. I've connected one mote (Tmote Sky) onto 2nd port. I can get access to the main page, at 192.168.1.36 with no problem. I can see some information about the mote: model=tmote sky, serial forwarder=9002 or control/

Re: [Tinyos-help] tmote connect and Tinyos-2.x

Yes status nc shows me the same thing as the web. Most significantly, 0 packets Rx. Otherwise, it reads the mote info correctly. I was reading the brochure that we received with the tmote-connect, and it does not mention the protocol command, so I'm thinking I need a firmware update. Eric On T

Re: [Tinyos-help] tmote connect and Tinyos-2.x

One thing I have noticed is that protocol autodiscovery works better if the mote is receiving packets during the Tmote Connect boot. Try configuring a BlinkToRadio application with a high sending frecuency, leave it running and reboot the Tmote Connect. BTW, what does the web status show you? Doe

Re: [Tinyos-help] tmote connect and Tinyos-2.x

I was thinking the firmware is in the CVS somewhere under boomerang, but I didn't find it. I'm pretty sure I'm having a problem with the interaction between the mote and the tmote-connect. When I run the base station on my desktop I get packets from the oscope mote. Then I take that same base st

Re: [Tinyos-help] tmote connect and Tinyos-2.x

> > So I think this is a long winded way of asking how to update my > > firmware, and where to get the latest firmware, and if this will help > The instructions on how to update the firmware are on the Tmote Connect datasheet. I have a

Re: [Tinyos-help] tmote connect and Tinyos-2.x

On Mar 4, 2008, at 12:52 PM, Eric Keller wrote: I am trying to use the tmote-connect with tinyos-2.02. I have been using it successfully with Boomerang. The tmote-connect says it's version is V2.3R29 I have programmed a mote with the base station software, and another with the Oscilloscope p

[Tinyos-help] tmote connect and Tinyos-2.x

I am trying to use the tmote-connect with tinyos-2.02. I have been using it successfully with Boomerang. The tmote-connect says it's version is V2.3R29 I have programmed a mote with the base station software, and another with the Oscilloscope program. This works with the base station on my desk