Thank you very much! Finally i got it.
Best regards,
Jürgen
Hi Jürgen!
Ok, I've downloaded the zip.
Here are they: PE2, PE3, PE4. In the schematics they are noted to be all
red!??
The screenshot is attached.
Best wishes,
Andrey
P.S. the screenshot is too big for tinyos-help mailing
Thank you for your quick answer. Where to find the wirings? I just
searched through the atmel homepage and the documents on it, but didn't
find something useful. Creating a new platform is described in TEP 131,
am i right? Thank you.
greets
Hi Jurgen,
I am sorry, but you need to check on
Juergen:
You need to check to which pin of the MCU the leds are connected on your
platform, and change the PlatformLedsC file accordingly.
BTW, these pin-specific wirings are all over the code in the platforms
folder. The best approach is creating your own custom platform (call it
atacrrz200)
Hi Jürgen,
These links are the first on the official atmel's ATAVRRZ200 web page:
http://www.atmel.com/dyn/resources/prod_documents/ATAVRRZ200_DemonstrationKit.zip
(and the appropriately doc:
http://www.atmel.com/dyn/resources/prod_documents/doc5183.pdf)
The download speed is very poorly, so I
Hi Jürgen!
Ok, I've downloaded the zip.
Here are they: PE2, PE3, PE4. In the schematics they are noted to be all
red!??
The screenshot is attached.
Best wishes,
Andrey
P.S. the screenshot is too big for tinyos-help mailing list. So my first
e-mail is pending to be delivered.
Jürgen wrote:
Hello everybody!
I have loaded the Blink app onto my ATAVRRZ200 motes (AtMega 1281 /
rf230 zigbee), but the leds won't blink. Is it possible that the
Port-/Pinmapping of the IRIS platform doesn't fit my motes? Is there a
way to alter or configure it? Or do you know any other reasons why the
Hi Jurgen,
I am sorry, but you need to check on the scematics if the two system
has identical wirings or not. You should create a differetnt platform
and build it on top of the iris platform.
Miklos
On Tue, Sep 30, 2008 at 3:56 PM, Jürgen Broder [EMAIL PROTECTED] wrote:
Hello everybody!
I
