Hello all!
Please, I need an urgent answer to these two questions.
Do all links in an homogeneous sensor network have the same bandwidth?
Even if we deploy an heterogeneous sensor network, do all links still have
the same bandwidth (I think no because this depends on sensor device chipcon
specific
Hi All,
does anyone know the amplitude of the wireless signal transmitted at 0dBm
for example. I'd like to know its amplitude in Volts and the physical
bandwidth...
Thanks a lot
Bob
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https
Alfred NOBEL ha scritto:
> Hello all!
>
> Please, I need an urgent answer to these two questions.
> Do all links in an homogeneous sensor network have the same bandwidth?
> Even if we deploy an heterogeneous sensor network, do all links still
> have the same bandwidth (I think no because this depe
Hi
Thank you Tommaso
2009/10/28 Tommaso Sorrentino
> Alfred NOBEL ha scritto:
>
>> Hello all!
>>
>> Please, I need an urgent answer to these two questions.
>> Do all links in an homogeneous sensor network have the same bandwidth?
>> Even if we deploy an heterogeneous sensor network, do all links
Hi, I just tried to find which is the best bandwidth that the tmote sky, the
micaz, or the imote can obtain, with just a part of motes working, but I
didn't find it out. I read that they use the zigbee but this doesn't means
that they can transmit at 250kbps. Does somebody know it?
thanks
--
[EMAI
Hi, I just tried to find which is the best bandwidth that the tmote sky, the
micaz, or the imote can obtain, with just a part of motes working, but I
didn't find it out. I read that they use the zigbee but this doesn't means
that they can transmit at 250kbps. Does somebody know it?
thanks
--
[EM
Quite some time ago I tried to characterize speed and reliability
and came up with about 100 default sized messages/sec for the micaz.
However, there is some question that this might have been limited by
the serial port speed so it's to be taken with a grain...
My report is here: http://www.etant
Hi
I'm wondering which is the channel bandwidth used by CC2420 (Telosb)
and RF230 (IRIS) radio-chips for 802.15.4 communication.
Bandwidth should be about a couple of MHz in channels around 2.4GHz
but I couldn't find information properly described neither in IEEE
standards neither in Cros
