excellent...I was just going to ask...
thx
MS
Harri Siirtola wrote:
Forgot the attachment, sorry.
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https://mail.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
I've connected a Bluetooth module to UART1. Its UART is digital level so I
don't need a level converter. Something like MAX3224 and a couple of
capacitors is what's needed for digital -> RS232 conversion. Chips with
less pins than the 3224 exist, too, if that's a problem.
As for software, I'
Forgot the attachment, sorry.
At 07:13 PM 2/15/2006 -0700, Michael Schippling wrote:
This comes up periodically. Try searching back on the help list.
One of these days someone will post a demo app...but not yet.
First, physically connecting to the board...I have my own layout
for a sensor boar
This comes up periodically. Try searching back on the help list.
One of these days someone will post a demo app...but not yet.
First, physically connecting to the board...I have my own layout
for a sensor board, but I'm not aware of any commercial products.
You can just solder to the right pads o
I got a mote kit and some sensors that are not
produced by Xbow. These sensors have their own 9-pin
serial com ports.
Has anyone done any programming to enable the
communication between motes and non-Xbow sensors?
Thanks.
- Liangping
__
Do You Ya
