Dear Philip and Dear David,
Thank you for your inputs.
I have been testing the power consumption of CTP-LPL
by increasing the beaconing period of CTP. Following
were my results.
Current
^
| -T1 -T2
| |-| | | |---|C1
| | | | |
PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of Ravi
Prasad
Sent: Friday, August 03, 2007 2:30 AM
To: [EMAIL PROTECTED]
Cc: Philip Levis;
tinyos-help@Millennium.Berkeley.EDU
Subject: Re: [Tinyos-help] Again Low-power
CC2420 multihop in
TinyOS2.xquestion
Hi Roman,
Thank you
) to see
what results I come up with.
-David
-Original Message-
From: Ravi Prasad [mailto:[EMAIL PROTECTED]
Sent: Sunday, August 05, 2007 6:49 PM
To: David Moss
Cc: tinyos-help@Millennium.Berkeley.EDU
Subject: RE: [Tinyos-help] Again Low-power
CC2420 multihop in
TinyOS2
On Aug 6, 2007, at 6:58 PM, Ravi Prasad wrote:
Dear David and Dear Philip,
I am able to get the low current in CTP-LPL. Although
the average current is high, but atleast I see that
beautiful 200uA reading sometimes. :-)
I just forgot about the mcu peripherals and was
concentrating too much
On Aug 6, 2007, at 9:48 PM, Philip Levis wrote:
defines the minimum beacon interval of the routing engine to be 1s.
If you increase it to, say, 30, then nodes will send one beacon
every 30s. They can send beacons more often than that in order to
repair from topology failures such as
]
On Behalf Of Ravi
Prasad
Sent: Friday, August 03, 2007 2:30 AM
To: [EMAIL PROTECTED]
Cc: Philip Levis;
tinyos-help@Millennium.Berkeley.EDU
Subject: Re: [Tinyos-help] Again Low-power
CC2420 multihop in
TinyOS2.xquestion
Hi Roman,
Thank you.
Have you tested your modified
Levis; tinyos-help@Millennium.Berkeley.EDU
Subject: Re: [Tinyos-help] Again Low-power CC2420 multihop in
TinyOS2.xquestion
Hi Roman,
Thank you.
Have you tested your modified CTP using CC2420LPL??
What was the power consumption??
I also used another approach ( a dirty quick fix
