Title: Message
Usually a multimeter won't give you good accuracy because 1) many won't
get down to uA resolution, and 2) the mote's power consumption moves all over
the place when running an application, so the multimeter doesn't have time to
settle on an accurate value.
If you
have access
At this point, the best way is probably hook up a small shunt
resistor (1-50Ohm depending on your load and oscilloscope accuracy)
in series between the battery and the board, either on the ground
side or the Vdd side. Then use an oscilloscope to measure it.
Also pay attention to the wavefor
