Hi, I'm not sure whether TinyOS really suitable for your application. The WSN in TinyOS is used to monitoring vast area, long period (1min - 1day/sampling), and long term (6 months until years without replacing the battery). 200 ms probably is very fast (though it's not the fastest one).
Anyway, I think you can reduce the delay, by reducing the Matlab's serial buffer. Regards, -daniel -------- Original Message -------- > From: [EMAIL PROTECTED] > Sent: Monday, September 03, 2007 10:09 PM > To: tinyos-help@Millennium.Berkeley.EDU, tinyos-help@Millennium.Berkeley.EDU > Subject: [Tinyos-help] Time-delay between Matlab and Mica2dot > > I am trying to implement a simple wireless control network using the > Mica2dot(433mhz) and the MIB510 base board. I have Interfaced the motes to > Matlab via a serial connection, through the Serial Forwarder, using Kamins > Matlab functions and TinyOs 1.1. > > The problem is that the return delay of the feedback system is greater than > 200ms which is much too slow for my application. I am wondering if anybody > knows approximately the time it takes for data transmission between Mat lab, > the serial forwarder and the Mica2dot, for a packet of 29 bytes. > > Any previous experiences with similar setups would be of great help. I need > to get reduce the delay by at least a half. > > Cheers > Mike _______________________________________________ Tinyos-help mailing list Tinyos-help@Millennium.Berkeley.EDU https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help