On 9/3/21 10:08 PM, Nate Bargmann wrote:
One of the aspects of amateur radio I've considered to get more active
in are the various state QSO parties. To that end, I'm starting this
thread to exchange information toward configuring Tlf for these events
and discover areas where Tlf can be improved
On 5/25/22 14:07, Ed wrote:
I use a ic-7300 and have it set to use USB0, but I get no rig control.
Not sure how to correct this, the 7300 uses a symlink to USB0, so how
do I get this to work ?
/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge
+_Controller_IC-7300_02038316-if00-port0
On 5/26/22 15:21, Ed wrote:
/var/log no winkeyer daemon shown. How to start ?
I don't exactly understand what you're seeing. Is that a message you
see in /var/log?
There are probably multiple ways to do this, but I use cwdaemon.
$ sudo apt install cwdaemon
On my IC-7300, I set:
USB Keyi
On 5/26/22 18:00, Ed wrote:
On Thu, 26 May 2022 17:06:02 -0400
Gary Grebus wrote:
On 5/26/22 15:21, Ed wrote:
/var/log no winkeyer daemon shown. How to start ?
I don't exactly understand what you're seeing. Is that a message you
see in /var/log?
There are probably multiple
On 5/28/22 14:30, Ed wrote:
I cannot get cwdaemon to work, no matter what I have tried. It starts
at boot using USB0, it's listed in tlf -v . tlf seems normal, rig
control and spots are good. Bandmap is full. But no CW from any F key.
Here is my logcfg settings
NETKEYER
NETKEYERPORT=6789
NETKEY