Dear Friends
I have recently purchased an IC-7610 and I find the problem that when
connecting the keyer via USB with the PC, the Cwdaemon does not recognize
it. The only solution I have found is in the CQRLog using the Hamlib
option. But I see that it is not the most successful solution for the
* On 2021 10 Jan 15:18 -0600, Juanjo EA8BGO wrote:
> Dear Friends
>
> I have recently purchased an IC-7610 and I find the problem that when
> connecting the keyer via USB with the PC, the Cwdaemon does not recognize
> it. The only solution I have found is in the CQRLog using the
ave recently purchased an IC-7610 and I find the problem that when
> connecting the keyer via USB with the PC, the Cwdaemon does not recognize it.
> The only solution I have found is in the CQRLog using the Hamlib option. But
> I see that it is not the most successful solution for the TLFL
I am trying to insert the IC-7610 directly from the USB port.
El dom, 10 ene 2021 a las 23:05, Drew Arnett ()
escribió:
> Are you trying to key the 7610 directly via its USB? Or do you have a
> USB keyer adapter you are using between the PC and the 7610?
> (something like the K1EL Win
t; I have recently purchased an IC-7610 and I find the problem that when
> > connecting the keyer via USB with the PC, the Cwdaemon does not recognize
> > it. The only solution I have found is in the CQRLog using the Hamlib
> > option. But I see that it is not the most successful s
yer.py, and off you go. It don't support speedchange +++ & --- ; but
> that should be possible to fix.
>
> 73 de OZ1GNN
> Chris
>
> Den søn. 10. jan. 2021 kl. 21.49 skrev Juanjo EA8BGO :
>
>> Dear Friends
>>
>> I have recently purchased an IC-7610 an
ld an then
>> rigkeyer.py, and off you go. It don't support speedchange +++ & --- ; but
>> that should be possible to fix.
>>
>> 73 de OZ1GNN
>> Chris
>>
>> Den søn. 10. jan. 2021 kl. 21.49 skrev Juanjo EA8BGO :
>>
>>> Dear Friends
>
whitch listen to port 6790
>>>> (cwdaemon) and retransmit on port 4532. Hamlib is listening on 4532 and
>>>> sends it to the radio. It is the same method used in Cqrlog and it works as
>>>> a charm. I've used it with the 7610 and my KX3; but it should be good
o
>>>>>
>>>>> The rigkeyer.py is a simple parser whitch listen to port 6790
>>>>> (cwdaemon) and retransmit on port 4532. Hamlib is listening on 4532 and
>>>>> sends it to the radio. It is the same method used in Cqrlog and it works
>
istening on 4532 and sends it to
> >> the radio. It is the same method used in Cqrlog and it works as a charm.
> >> I've used it with the 7610 and my KX3; but it should be good with any rig,
> >> where morse is supported in Hamlib. Just start rigctrld an then
> >>
r.py is a simple parser whitch listen to port 6790
> (cwdaemon)
> > >> and retransmit on port 4532. Hamlib is listening on 4532 and sends it
> to
> > >> the radio. It is the same method used in Cqrlog and it works as a
> charm.
> > >> I've used it with the 7610 and m
emon (neither in winkeydaemon).
>> > >
>> > > Best regards,
>> > > Juanjo
>> > > EA8BGO
>> > >
>> > > El lun, 11 ene 2021 a las 9:32, Christian Treldal (<
>> > > christian.trel...@gmail.com>) escribió:
>&
Hi Juanjo,
On Mon, Jan 11, 2021 at 11:28:34AM +, Juanjo EA8BGO wrote:
> Hamlib 3.3 I installed it from source.
>
> With $ ./configure --with-python-binding it gives me error:
> hecking python extra linking flags ... -Xlinker -export-dynamic -Wl, -O1
> -Wl, -Bsymbolic-functions
> checking cons
Hi Drew,
On Mon, Jan 11, 2021 at 02:15:00PM +, Drew Arnett wrote:
> Does hamlib support keying through the CAT serial port device?
yes, take a look to this (especially in case of Python3):
https://github.com/Hamlib/Hamlib/blob/master/bindings/py3test.py#L88
or you can use it through "rigctl
Thanks. Wasn't clear to me from this thread.
Yet another cwdaemon compatible interface for WinKeyer USB in python:
https://github.com/drewarnett/pywinkeyerdaemon
I use that with tlf for CW keying and just plain vanilla hamlib that's
bundled with my linux distro, debian, for CAT for tlf.
Drew
n7
Solved!
I already found where the problem was.
For IC-7610 users, steps to follow:
1. Menu -> SET -> Connectors -> USB SEND / Keying
2. USB Keying (CW) USB1 (B) DTR
3. in cwdaemon; cwdaemon -d ttyUSB1 (or its port) -p 6790
Thank you all for trying to help me.
Best regards
Juanjo
EA8BG
Dear Friends.
I cannot configure the CAT of my IC-7610. I know that the hamlib works
since in the CAT of the CQRLog I have no problem, I do not have a
configuration problem in the FLRig either.
##
#RADIO CONTROL
RIGMODEL=378
RIGSPEED=9600
RIGPORT=/dev/ttyUSB0
Hi Juanjo,
On Sat, Jan 30, 2021 at 02:07:17PM +, Juanjo EA8BGO wrote:
> Dear Friends.
>
> I cannot configure the CAT of my IC-7610. I know that the hamlib works
> since in the CAT of the CQRLog I have no problem, I do not have a
> configuration problem in t
rigctl(d), Hamlib 3.3
El sáb, 30 ene 2021 a las 14:30, Ervin Hegedüs ()
escribió:
> Hi Juanjo,
>
> On Sat, Jan 30, 2021 at 02:07:17PM +, Juanjo EA8BGO wrote:
> > Dear Friends.
> >
> > I cannot configure the CAT of my IC-7610. I know that the hamlib works
> >
Do you have this line in your config?
RADIO_CONTROL
At least in the excerpt it is missing. (there is a similar one, but it has no underscore and is commented out)
73,
Zoli
##
#RADIO CONTROL
RIGMODEL=378
RIGSPEED=9600
RIGPORT=/dev/ttyUSB0
###
Thanks Zoli, that was what was failing me.
Now it works correctly.
regards
Juanjo
El sáb, 30 ene 2021 a las 15:34, Zoltan Csahok () escribió:
> Do you have this line in your config?
>
> RADIO_CONTROL
>
> At least in the excerpt it is missing. (there is a similar one, but it has
> no underscore a
21 matches
Mail list logo
