I think I saw someone talk about using RG-6 75 ohm coax at a full KW
and F connectors on 160, but I cannot remember if it was on this
reflector. I have some "high Quality" RG-6 cable with the "right" vp,
but before trying this I would like to hear from someone who has
successfully done this alr
Anyone have the specifics of the parts used in the ICE196 front end protector?
A picture of the interior shows two binocular cores, two diodes, a resistor and
two ceramic caps. The manual does not list any details, windings etc. nor can I
find anything web surfing.
Thanks - Steve WB6RSE
___
- Original Message -
From: "ZR"
To: "Jim Bennett" ;
Sent: Friday, October 14, 2011 8:49 AM
Subject: Re: Topband: Fwd: Capacitor for Inverted L
I dont understand the sudden urge or desire of some to suppress all high
angle radiation
from an inverted L. It is well established that even
Hi All,
Till 13 October Jacek worked 350 QSOs on Topband ( almost 3000 total)
from which 50 QSOs are with Europe...not counting Ukraine and European Russia.
He wrote the Island is in a widest place only 30m wide now ! ( On Goggle map it
seems
to be wider but probably its an old picture) and there
That would have been me Dave. I have been using Garden Variety RG6
on my 160 array for well over 20 years. I tested a single run of it with a pair
of heathkit dummy loads. Test piece of cable was 10 feet long with F
connectors to F-UHF adapters. Brick on the KEY on the Amp until the
Dummy loads
