The deadline is the 25th of this month. Just 17 more days left. Even if you
have zero interest on what goes on above 1850 kHz, it is still crucial to get
this passed. In the albeit unlikely but finite possibility that radiolocation
beacons will ever return, it would impact all users of the ba
A source for copper radial wire is old transformers and chokes that many may
have in storage areas. In general wire removal is easier from chokes, but
both can be rewarding. Use the suitable wire for radials, and maybe sell the
remaining copper to a junk yard.
73
Bruce-K1FZ
www.qsl.net/k1fz/
I'm starting to think about antenna work this summer and one of the items on my
list of improvements is my 160M capability. I have 2 150' towers on my property
that are 192' apart and lined up at about a 39 degree azimuth. I was planning
on building a phased array of inverted L's 255' apart (1/
Hi Jeff,
Thanks for pointing that out. I'm sure 60% copper clad aluminum will work just
as well as copper radials.
73
Frank
W3LPL
Original message
>Date: Thu, 7 Feb 2013 12:51:49 -0800 (PST)
>From: Jeff Woods
>Subject: Re: Topband: Price of Copper Going Up
>To: "donov...@starpow
On 2013-02-06, at 8:32 AM, Tom W8JI wrote:
>
> As a standard practice, and from field experience, we flooded the center of
> the connector with clear silicon dielectric compound. A suitable material is
> readily available at almost any auto parts store as "Dielectric Tune Up
> Grease" in a si
Hello Mike!
Yes, there was an announcement about the Dayton TopBand Dinner several weeks
ago on this reflector.
N6TR and K3UL will be speaking.
Tickets are available now
http://topbanddinner.com
73,
Tim K3LR
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On B
Be advised that the wire in the Ebay listing is Copper Clad Aluminum. The fine
print's towards the bottom.
While I'd have no qualms about using it for my seasonal, above ground radials,
some of you with higher standards and deeper pockets may prefer all copper.
-Jeff, W0ODS
>_