Hi guys
I am thinking about doing a couple of reversible bevs and I was thinking of
using this kind of cable
http://uk.rs-online.com/web/p/cable-telephonique/0407010/ I have tons of
it. Has anyone done some bevs with this kind of cable wire?
Thanks
73's Filipe Lopes
CT1ILT - CR6K
F4VPX - TM3M
_
I need to separate KLH 3 inch aluminum boom sections. When assembled 20 years
ago I used Penetrox on them so hopefully they are not welded together. In fact
one of them separated 1/2 inch then stuck. Would there be a “penetrating oil”
that would help to free/lubricate these joints to make the se
Hi Rod,
Sorry to hear about your troubles. The sticking may not be aluminum
corrosion, but might be a burr on one of the through holes, which could be
digging into the other member and possibly exacerbated by a slightly out of
round condition from over tightening the hardware that held the joint
t
I've been using PB Blaster penetrating oil with good success. Since you
know there are Penetrox particles (it is zinc dust plus castor oil per
the MSDS) between the tubes, I'd try to wick some PB in there, let it
sit for a while and then work it back and forth to loosen up the dried
up Pentro
