Re: Topband: RFI on TB

2019-07-23 Thread k3ky
Rumor has it PG is facing possible bankruptcy due to being found responsible for the big fire(s) in CA. That being the case, I would expect they would have to re-prioritize greatly- problems such as yours are, to them, 'lost in their noise' (pun intended). 73, David K3KY (You wrote:) I want

Topband: RFI On TopBand by 57JNDenneny

2019-07-23 Thread Dick Bingham
Regarding ===> "Message: 1 Date: Mon, 22 Jul 2019 15:59:44 -0700 From: <57jndenn...@comcast.net> To: Subject: Topband: RFI on TB " As a starting point to check-out *everything* between the feed-line connection directly at the *antenna feed-point* and a receiver, connect a 50-ohm termination at

Re: Topband: RFI on TB

2019-07-23 Thread Chuck Dietz
In the Houston, Texas area the hams know the cell number of the guy who works for the electric distribution company locating the noise sources. We can call him and leave a very detailed message about the noise source location and he is quick to verify it and have it repaired. Ask around. Logan

Re: Topband: RFI on TB

2019-07-23 Thread Ken K6MR
I want to know how you guys get the power company to respond so quickly. I’ve been calling Pacific Gas and Electric for 6 weeks now and nothing. I can’t even get a phone call. Ken K6MR From: Topband on behalf of K4SAV Sent: Tuesday, July 23, 2019

Topband: 160 meter noise

2019-07-23 Thread Lee STRAHAN
I have a Ray Jeff 680/ADF marine radio direction finder I have used for noise location for a long time and it is in need of some maintenance. I have looked for a schematic for years without success. If anyone has a schematic they could share I would appreciate a copy. Even a similar model

Re: Topband: RFI on TB

2019-07-23 Thread K4SAV
Don't know why the mail system thinks this message is spam... Trying again. Lightning surge suppressor on power poles can be big noise generators when they go bad. The worst one I found was three miles from my house and created S9 noise on my receiving array. Its characteristics fooled me

Re: Topband: RFI on TB

2019-07-23 Thread Rob Atkinson
> Over past few months, I have picked up an S5-S7 noise signature on my TB inv > L antenna with K2AV FCP system. I would not use an inverted L for receiving. Unusable for rx at my QTH but FB for transmitting. 73 Rob K5UJ _ Searchable Archives: http://www.contesting.com/_topband

Re: Topband: RFI on TB

2019-07-23 Thread Mark - N5OT
I can relate the same story here.  The power company guy came by, I showed him what direction it was coming from, he went to the nearest pole with a lightning arrestor in that direction (a little over a quarter mile away - not every pole has one) disconnected the lightning arrestor, and the