y are quick and easy to
replace. One size smaller wire might be good too but I haven't had to
splice the WD-1A yet. We had a derecho here last August that basically
flattened my timber. The WD-1A is still good but buried under countless
blown down trees.
73, Glenn KD0Q
On Sun, Jan 3,
2 feedlines. I have two antennas, NE-SW and NW-SE, so I put a switch
box near the antenna terminations and only have a control cable and one
RG-6 run from the shack.
Hope that helps.
73, Glenn - KD0Q
On Fri, Feb 28, 2020 at 2:03 PM Joe Giacobello, K2XX via Topband <
topband@contesting.com>
I also noticed the lack of SR peaks. On those mornings the peak seemed to
be about an hour before SR.
73, Glenn KD0Q
On Fri, Jan 12, 2018 at 9:36 AM, wrote:
> There have been many mornings (in fact, most mornings) here in the Midwest
> where there has been little or no sunrise peak. If
. It has
been quite useful on 160m-30m.
Hope that helps.
73, Glenn - KD0Q
On Mon, Sep 5, 2016 at 4:50 AM, Gabriel - EA6VQ wrote:
> Hi,
>
> Anyone using the BevFlex-4 antenna (or the former version, the BevPro.1)
> could share his impressions?
>
> I am thinking of setting up
The ON4UN Low Band DXing book talks about a reversible beverage using coax
as the antenna element..
Glenn, KD0Q
On Mon, Aug 22, 2016 at 11:26 AM, Warren Merkel
wrote:
> Paul,
>
> I built my own modules, implementing a reversible, stretchable BOG using
> RG-6. See my QRZ.COM pag
At the very bottom of the page, select English or Italian.
73, Glenn - KD0Q
On Mon, Nov 2, 2015 at 5:54 PM, James Rodenkirch
wrote:
> The DX news, contest calendar down the left hand side, as well as the DX
> coffee news on the right hand side is/are in English and the links fo
There will be some interaction. How much? All depends. You can get
some idea by modeling with EZNEC. The tower can have some effect too.
Glenn
KD0Q
On 1/30/2015 11:55, Don wrote:
What interaction between a Inverted L and 80 & 40 meter dipoles off the same
tower ?
Don
W
For my RG-6 beverage I used a marline hitch spread out over a couple of
feet and then taped it up after it was in tension.
73, Glenn - KD0Q
On 1/30/2015 10:57, Tracey Gardner wrote:
I have a follow on question from my non-invasive tree attachment
question.
I am running RG58 through a
The CQ 160M CW and SSB contests coming up might be a good bet. I
worked, and confirmed on LOTW, WAS in one CW contest a few years back.
Good luck!
73, Glenn - KD0Q
On 1/9/2015 11:55, James Bennett wrote:
Yep, I’m planning on it. I also participated in the recent ARRL 160 contest,
but never