Herb,
Try Fair Radio Sales in Lima, OH
The catalog I have shows a 5-1/4in diameter thru panel insulator.
Ron N9AU
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Herb
Schoenbohm
Sent: Tuesday, December 17, 2013 1:19 PM
To: topband@contesting.com
Subjec
A short length of SH 40 PVC pipe with end caps works good. Cement only
one end cap. Mount any connectors/screw terminals to the pipe or
cemented end cap. Tape seal the other end cap and keep the assembly
vertical with the tape sealed end up. You will have easy access to the
enclosed hardware.
Ron N
Bruce, if you insist on using the Ameritron, PL259 to F adapters are
available at Tower Electronics in Green Bay, WI
They have an online catalog.
Ron N9AU
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Tom
W8JI
Sent: Tuesday, December 04, 2012 5:25 AM
Many 160m Q's from 4 Feb still missing from upload made a few minutes ago.
Ron N9AU
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Lloyd Berg
N9LB
Sent: Friday, February 06, 2015 11:41 AM
To: topband@contesting.com
Subject: Topband: Missing K1N 160m
There is a product called "Liquid Tape" that is available from hardware stores
and home improvement centers. It has to be applied in layers but aggressively
adheres to the coax end. You need to pay special attention covering the braid
since water will wick.
Ron N9AU
-Original Message-
F
Trevol, the portion of the coil between the tap and the base of the vertical
determines resonance and needs to be variable unless you were lucky and found
the correct value. The shunt portion of the coil affects the feed impedance.
This shunt portion is like the hairpin match for a yagi. You sel