as that they weren't
needed. I think I worked all states except HI and AK. No EU that I recall.
It was more fun than I expected it to be!
73,
Lee, AA4GA
On Mon, Jul 1, 2024, 1:59 PM Radio KH6O wrote:
> Is anyone regularly using say, 25W or less on 160?
>
> --
> 73,
> Jeff K
Steve, congrats.
Ross was my 100th DXCC contact 4/5/2007 at about 15 minutes after his
sunset. Confirmed Q in 2018 as I don't follow up well.
I don't think I believe my log as it lists 599 both ways?
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of Steve
La
Here you go:
http://www.hamstuff.com/QView/qslholders.html
73 de Lee, AA4GA
On Tue, Feb 6, 2024 at 5:37 PM Steve Harrison wrote:
> On 2/6/2024 1:34 PM, Jim Brown wrote:
> > Because of what I view as this abuse of the Bureau, I stopped sending
> > JA cards about ten years ago.
I worked him on CW. Granted, it was 15 meters, not 160. But he is
operating CW, and is a good op.
73 de Lee, AA4GA
On Mon, Oct 9, 2023 at 12:29 PM Craig Clark wrote:
> Looking at DX Summit it looks like FT* will be his preferred mode of
> operation.
> Not on digital. Any infor
lot easier to work with in the long run as they have
increased source capacitance causing less error from other capacitive loading
from mounting arrangements and etc. ..
This again suggests to me if you can that you should send me a couple
pictures of your antenna element setup.
Lee K7TJR
diameter. Then make sure there was a good earth ground
under each element with and/or without adding radials.
It also may be of help if you sent some element mounting and grounding
pictures direct to me for comment.
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of
I get spotted as KX4M and KK4TT all the time. It does not matter if I send by
hand or through N1MM / Winkeyer.
73 de Lee KX4TT
On Wednesday, December 7, 2022, 08:48:47 AM EST, wrote:
Hi Ron,
The wrong call sign spotting and "run of dupes" happens a few times a
year to me.
And don't forget to discharge the element to ground before connecting to your
measuring device. Static is NOT your friend in this case.
Lee K7TJR
-Original Message-
From: Topband On Behalf Of Rob
Atkinson
Sent: Saturday, November 12, 2022 3:50 PM
To: topband@contesting.com
Subjec
and have for several years as age took its toll and he
had to move to a care facility after Kobi his wife passed. I occasionally
received updates from Tree as he had contact with Bob's family. Thank you Tree.
RIP Bob W7LR and thanks for the memories.
Lee K7TJR OR
Subject: Re: To
s amp would not have a very high
second order IMD capability and if you were too close to any broadcast band
high power stations it could be a problem.
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of
Ashraf Chaabane
Sent: Sunday, February 20, 2022 11:43 AM
To: VE6WZ_Stev
Rick's point is well made. Take a look at these measurements from about 10
years ago.
https://www.k7tjr.com/coaxial_tests.htm
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of
Richard (Rick) Karlquist
Sent: Friday, February 4, 2022 2:03 PM
To: VE6WZ_Steve ; David
According to Roy Lewallens Eznec site there are no more expensive versions of
his Eznec software. He is retiring and is leaving a last version for free
download.
Take a look at Eznec.com for details.
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of Jim
Brown
Sent: Monday
best to NA from around 0030Z, so that's
> when I tend to come on the band (rather than around our Sunrise on Thursday
> morning . . . but that is still what I call Wednesday night)
So, when you say 0030Z, you mean 0030Z on Thursday, correct?
73 de Lee, AA4GA
_
Searcha
Yes, changing one's log after the fact to cover up a violation is scienter
or guilty knowledge, meaning fraud. DQ is the only appropriate action.
Lee, AA4GA
On Sat, Dec 25, 2021, 1:11 PM W0MU Mike Fatchett wrote:
> If you have violated the terms of your license that should be a DQ.
&g
dance amps
have common mode isolation built in so placing added isolation would be better
at the combiner. Building your own high impedance amps would certainly need
common mode isolation.
You are correct Dennis as it depends on the overall system design.
Lee K7TJR
Hi-Z Antennas
-Ori
Congratulations Steve,
Your passion shows up in the voluminous amount of information on many aspects
of Top-Band and others you have shared with the world.
Well deserved!
Lee Strahan
K7TJR
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
o a
close transmitting antenna.
My choice is an abundance of caution.
Home depot lists a plethora of types of "Black electric fence insulators"
among many other listings including the Zareba name in the original post.
Lee K7TJR OR
Subject: Topband: Materials for Beverages?
at any farm store so support your local establishments.
Yes, I used to own a farm store.
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of Gene
Smar via Topband
Sent: Monday, August 2, 2021 1:36 PM
To: topband@contesting.com
Subject: Topband: Fwd: [TowerTalk] Fwd: Amazon
ENOUGH!!
TU es 73 de Lee KX4TT
On Wednesday, 10 March 2021, 06:49:23 pm GMT+1, Martin Kratoska
wrote:
First - before any comment: I thoroughly tested FT8. Trying to "be on"
since the very first steps of FT8. Made some ~3000 QSO with 150
countries DXCC. Studied the pro
Hi John,
What did you use as the P3 bandwidth for your noise measurement? And
conversion to 1Hz equivalent.
The P3 has its own bandwidth and is not affected by setting the receiver
bandwidth.
Lee K7TJR OR
(Note: what follows is a long, technical discussion about noise and “small
No its not a valid message. Note the extra underscore in the .com/_ of the URL.
DO NOT CLICK anything on that message.
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of
pwhel...@earthlink.net
Sent: Sunday, February 14, 2021 11:18 AM
To: 'Admin' ; topband@cont
to detail of phasing almost always produces 30 dB of front to
back ratio and when combined with new version more accurate element amplifiers
I am getting reports of 40 dB front to back
So sometimes what looks unneeded and out of place may not be just because it
looks out of place.
Lee K7TJR
://michaelgellis.tripod.com/magict.html
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of
donov...@erols.com
Sent: Tuesday, February 9, 2021 3:28 PM
To: topband
Subject: Re: Topband: The Magic-T
This is the corrected URL for Steve's Magic-T video
www.youtube.com/wa
.
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of W7TMT
- Patrick
Sent: Thursday, January 28, 2021 10:55 AM
To: fmoeves ; topband@contesting.com
Subject: Re: Topband: Important Alert
That is the right question!
From: Topband on behalf of
Sorry Guys, I miss interpreted Csaba’s transformer problem. My email program
truncated the URL’s and most of the information past that point. What I did get
I misread as a result so now I am curious also of his dilemma.
Lee K7TJR OR
From: Don Kirk
Sent: Saturday, January 2, 2021 3:03 PM
To
years to test a new
brainstorm antenna.
From what I saw he had a 1:1.16 SWR which could not get much better in my
opinion. Apparently he thought it could be better.
All is good HNY
Lee K7TJR OR
From: Don Kirk
Sent: Saturday, January 2, 2021 1:54 PM
To: Lee STRAHAN
Cc: HA3LN ; Mike Waters
you wanted to know. HNY
Lee K7TJR OR
From: Mike Waters
Sent: Saturday, January 2, 2021 11:44 AM
To: Lee K7TJR
Cc: HA3LN ; topband
Subject: Re: Topband: (2wire) Beverage transformers
Lee,
What kind of wire do you use that allows that many turns (4t and 16t)?
73 Mike
W0BTU
On Sat, Jan 2
.
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of HA3LN
Sent: Saturday, January 2, 2021 4:59 AM
To: topband@contesting.com
Subject: Topband: (2wire) Beverage transformers
Hi All and HNY for 2021.
Preparing for the CQ160m with new (2 coax) 2-wire beverages to cover the
missing
Hmmm, Nick,
I beg to differ with you. I don’t care about scores or countries, zones
worked but I do care about 160 meter receiving antennas.
In my opinion your statement is dead wrong.
Not looking for a war of words or any more discussion. I will not respond again
about this.
Lee K7TJR
Hi
which is what I paid. And a little postage.
You are correct, don't buy the Chinese ones as the ones I received were so slow
they must have been audio transistors.
Lee K7TJR
Hi-Z Antennas
-Original Message-
From: Topband On Behalf Of
Edward stallman
Sent: Thursday, October 22, 2
l power on direct to me special
request..
73
Lee K7TJR
Hi-Z Antennas
Subject: Topband: RX Power over Coax
Regarding the issue of voltage over coax to power the preamps used at the base
of short verticals, Lee, K7TJR, developed an alternative power feed system for
his new SMD pream
cleaning up after a tornado like
storm with 100 MPH winds that went right over my house. Minimal damage except
for the top 1/3 of my 160 vertical and lots of tall trees down in what's left
of the yard. All else is fine with nothing I can't repair.
Good luck.
Lee K7TJR Culver OR
most interesting as Chris continues on with these loops as a
counterpoise and reports more of his observations from experimentation. Perhaps
there is indeed something new...
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of Chris
Moulding
Sent: Monday, May 4, 2020 1:58 AM
To
Always sad to learn that a giant in any field has left the battle. Herb was a
great positive influence and no doubt a role model for many in our hobby.
James T. Lee, MD
NK7B
Minnesota
> On Apr 30, 2020, at 08:02, topband-requ...@contesting.com wrote:
>
> Send Topband mailing list su
loss changes with temperature.
Regards all and thanks for the tips and the bandwidth, 73
Lee K7TJR OR
On 4/8/2020 1:28 PM, Lee STRAHAN wrote:
> Even if the copper center conductor expands, the way the cable connectors
> are made allows the copper to simply push in the con
Robin WA6CDR mentioned this to me in an earlier exchange this AM. It was not
me. Should have mentioned that before. Sorry Robin, You the Man!
Lee K7TJR
-Original Message-
From: Richard (Rick) Karlquist
Sent: Wednesday, April 8, 2020 2:00 PM
To: Lee STRAHAN ; topband@contesting.com
cable to the DUT to verify the VNA sees the
difference.
I will report on this again soon.
Lee K7TJR.
These numbers seem too good to be true.
The tempco works out to less than 7 PPM/°C.
Consider that the coefficient of thermal expansion of copper is +17PPM/°C.
Refer to Figure 7 of this:
https
had to be done in my mind.
Here is some more shocking cable data I took several years ago
https://www.k7tjr.com/coaxial_tests.htm
Cheers,
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of Mike
Smith VE9AA
Sent: Wednesday, April 8, 2020 11:49 AM
To: topband
ained constant with winter
deployed arrays.
Incidentally, T&B Snap and Seal have been the best connectors here for
repeatability.
Lee Strahan
K7TJR
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
gain. Just my $.02
Lee K7TJR
From: Dave Cuthbert
Sent: Monday, March 16, 2020 3:05 PM
To: Lee STRAHAN
Cc: topband@contesting.com
Subject: Re: Topband: Slightly OT - amplifier noise
Circuit gain is accounted for in my calculations. I ran a sim of the input amp
and could get it to work with gains
what the insertion gain
of this device would be. Or a measurement might be in order with gain pots at
max. It could be amplified input device noise at the output.
Lee K7TJR
-Original Message-
From: Topband On Behalf Of Dave
Cuthbert
Sent: Monday, March 16, 2020 2:05 PM
To: n...@arrl.n
. Fortunately for us there are
some op-amps now that show some really great specs. Unfortunately for us a lot
of the older through the hole mount parts are disappearing quickly. Surface
mount seems here to stay.
Lee K7TJR
From: John Kaufmann
Sent: Thursday, March 12, 2020 4:14 AM
To: k7...@msn.com
ation. The noise gain is easy. I say we because I have a
retired very smart Ham friend in Finland that has helped me through this. It h
as caused me to rethink gain distribution in some of my arrays.
Lee K7TJR OR
What matters is the signal-to-noise ratio (SNR). Take the canonical example of
an
noise power times the square root of
the number of elements assuming equal levels from each amp. In the case of 8
elements 4.5 dB increase which is no small matter as well. In the case of the
three elements the noise summation would be about 2.4 dB higher than a single
element.
Lee K7TJR OR
As
Mouser 601- 25-7630 or 601-25-7660
[Lee K7TJR]
>>>Use an F connector (a high quality one that can be torqued.)
Can you point to a place that sells them. I became a 'fan' of F termination,
but have recently had second thoughts because of the bulkhead connector's
ll to distraction with other fine points that Hi-Z amps
need as specifications. It may not meet the eye but that is why performance
comes at a price.
Lee K7TJR
Hi-Z Antennas
Chris,
Assuming a trans-impedance amplifier, "unity gain" is enough (with reasonable
size elements). Noise and I
providing the very best I can
for the top-band community.
Lee K7TJR
Hi-Z Antennas
-Original Message-
From: Topband On Behalf Of Henk
Remijn PA5KT via Topband
Sent: Wednesday, March 4, 2020 12:14 AM
To: topband@contesting.com
Subject: Re: Topband: YCCC 9 Vertical Array Preamplifiers
I
rsion called the Plus V2 version that has 6 dB more
gain and will replace the current version in most new arrays and production as
time goes on.
The amps have been submitted to DX Engineering and will show up in their
offerings soon.
Sorry for the shameless plug but some information was needed
transistors at best. I tried them.
LeeK7TJR
8125 SW Larch Dr.
Culver, OR 97734
-Original Message-
From: Topband On Behalf Of
Richard (Rick) Karlquist
Sent: Sunday, March 1, 2020 3:31 PM
To: VE6WZ_Steve ; Topband
Subject: Re: Topband: 9 circle RX array combiner board
On 3/1/2020
issue."
Lee K7TJR OR
It's more than antennas. There's also propagation. You're 700 miles ESE of me,
which gives you a path to EU over less of the auroral zone.
AND there's noise, which has been increasing over time. My first years in W6
were more productive for CW o
Yes, somewhat common in the "hollow state" device days(Tubes).
Old also Wayne.
Lee K7TJR
Subject: Re: Topband: Topband resource
Very good Jeff! See Google/Wikipedia. Wiki says "on the order of 1 pf/inch."
(You must be as old as I am . . .)
- N7NG
On 1/14/2020 11:49 AM
e has determined the exact cause of the
failure yet to my knowledge.
Lee K7TJR
Hi-Z Antennas
Hello Mark!
I have the YCCC Hi-Z spaced at the compromised 60 ft. parameters to improve
80 & 40m operation - that was a mistake!
Go with the recommended 160m spacing. I plan to modify my Hi-Z fo
resistances to ±1%.
However, Tim's warning still applies in that this mod may damage the
performance of the array. I only mention it because I've used it with kite
and balloon antennas to drain off static discharge, and it may prove useful
here.
73 de Lee KX4TT
-Original Message-
Fro
Marty,
You may be seeing errors in your readings due to broadcast pickup. This is
common when modern R+Jx measurement tools are connected to large antenna
structures. Others have described ways around this problem before here on the
topband chat.
Lee K7TJR OR
Thanks for the response
around a Megohm or more with nothing connected.
Lee K7TJR
Hi-Z Antennas
-Original Message-
From: VE6WZ_Steve
Sent: Tuesday, September 24, 2019 1:58 PM
To: Lee STRAHAN
Cc: topband
Subject: Re: YCCC 9 circle preamp failure test
Hi Lee…
You are absolutely right, a failed coupling
.
Something does not add up here.??? What is the clue that tells you the
capacitor has failed. Lack of performance/directivity or noise. Noise might
indicate oscillation.
Lee K7TJR
Hi-Z Antennas
-Original Message-
From: Topband On Behalf Of VE6WZ_Steve
Sent: Tuesday, September 24
OK - A few more additions
Lee
DMR
C4FM/System Fusion/Wires-X
D-STAR
EchoLink
IRLP
Remote Stations
RemoteHams
Remote Ham Radio
Amplifiers
Big Antennas
Little Antennas
OMs
YLs
XYLs
Harmonics
Sub-Harmonics
Solid-State
Tubes
Integrated Circuits
SDRs
-Original Message-
From: Topband
...
Kenwood
Yaesu
Icom
Elecraft
Tower Rules
JT65
JT9
FT8
FT4
K1JT
Guys, it's probably not a complete list......but it's a
start!!
73 de Lee KX4TT
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Moisture can adversely affect a BOGs performance. BOGs work best in arid
climates...so if you see me running around with a Ladies Heat Gun
(hair dryer) in the middle of the night
Lee KX4TT
-Original Message-
From: Topband [mailto:topband-boun
ones that have not seen them to view Frank W3LPL's videos on
receiving antennas. This is a very good presentation.
Part 1 https://www.youtube.com/watch?v=RX4eLmJWNeo part 2
https://www.youtube.com/watch?v=fyZR9uMBnIo
Everyone's mileage may vary.
Lee K7TJR
Hi-Z Antennas
-O
I have another comparison chart here on the Hi-Z Antennas website. It has a
little more information.
https://www.hizantennas.com/receiving_antennacomparison_char.htm
Lee K7TJR
Hi-Z Antennas
-Original Message-
From: Topband On Behalf Of terry burge
Sent: Tuesday, July 30, 2019 11:44
number schematic may help.
Thanks Guys,
Lee K7TJR OR.
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
Or "How do I deal with my 160m tic?!?"
Lee KX4TT
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Carl
Luetzelschwab
>
Subject: Topband: unwelcome topics
Does this mean a topic like "What Makes 160m Tick" would not be welcome?
Department shall make a special reporting form available for
this purpose. 160 Meter Card Checkers can be found on the complete list of
DXCC 160 Card Checkers.
73 de Lee KX4TT
> On Mon, Jun 24, 2019 at 3:18 AM Herbert Schoenbohm <
> herbert.schoenb...@gmail.com> wrote:
>
>
interaction likely causing pattern distortion during RX.
One way to deal with that is to detune the TX elements during RX. I suggest you
contact Gary KD9SV about detuning towers. He also makes front end protectors
always a good idea.
Lee K7TJR
Hi-Z Antennas
Subject: Topband: Hi Z 4 el. RX
Hey Bob,
Don’t forget that you could interfere with your Hi-Z receiving array by
getting more radials close to it.
LeeK7TJR OR
-Original Message-
From: Topband On Behalf Of Chortek, Robert L.
Sent: Tuesday, April 16, 2019 10:34 AM
To: topband@contesting.com
Subject: Topband
important when you are using
receiving antennas with very high RDF and front to side/back ratio.
Lee K7TJR OR
> This is used to replace a traditional manual rotary or push button
> direction switch. Although a system something like this is required to
> control antennas at a remote QT
Rich K7ZV was reporting he was hearing Dave very light from his hilltop place
in southern OR. He was unable to make the Q. I have a pretty high noise floor
at the moment and did not hear anything except a ping or 2 at some 200 miles
North of Rich.
Sigh,
Lee K7TJR OR
-Original Message
not. The only indicator of
performance in the long run is smiles behind the dial. Hope you, K7XH get lots
of private messages to help you with your choice as well. I am thinking your
trees are a non-issue.
Lee K7TJR
Hi-Z Antennas
> Any experience with the same or thoughts?
I wo
SAL-30 except for meeting KB7GF the
designer at Dayton and comparatively running the NEC model he published.
Lee K7TJR
Hi-Z Antennas
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
untiring dedication.
Here is the link to the recordings.
https://1drv.ms/f/s!Aic-1tUvn-65gWcEGD2tNa-JITWd
Awesome.
Lee Strahan
K7TJR
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
If I was KH6LC I would be rather offended by that comment Bruce. What does
it Really mean? Perhaps not what the words really say? KH6LC has more hard work
in his station than many.
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of F Z_Bruce
Sent: Monday, December 31
OOPS, I did not see the Gold Plating aspect of the Pasternack PL 259 connector.
Guess I better get a half-ozen since gold is alwasys supposed to be going up
in price!
Jim
NK7B
_
Searchable Archives: http://www.contesting.com/_topband - Topband Reflector
The Pasternack offerings are pretty expensive, especially given that no silver
is present! They are listed at about 11 bucks each unless I misread the data;
I will try a couple of them with RG213.
Sad to hear ths rumour that there may be a threading problem when using these
and attaching to am
ell.
He is a great guy when you get to really know him. It would be awesome to
contact him again.
Thanks Tree.
Lee K7TJR OR
-Original Message-
From: Topband On Behalf Of Tree
Sent: Saturday, December 1, 2018 8:01 AM
To: 160
Subject: Topband: W7LR
Many of you have probably no
I have the SS Line Launcher, which uses .22 blanks and can shoot its
custom-shaped projectile a VERY long distance. I agree with the previously
posted tip of spreading a plastic tarp so that shot line can feed out with
minimal chance of snagging or forming tension knots on itself. I also like
information.
Lee K7TJR Hi-Z Antennas
-Original Message-
From: Topband On Behalf Of kol...@rcn.com
Sent: Friday, November 30, 2018 9:23 AM
To: Topband@contesting.com
Subject: Topband: Info on modding 4 el HI-Z to 3 el HI-Z wanted
Anyone have any info? I have a 4 el unit but can only
capability of their RCS8V product. Its not of much
concern for transmitting antennas but certainly can be with receiving antennas
with high directivity.
Lee K7TJROR
Subject: Topband: RCS8V is the correct model
Had a brain fart here. I meant to ask RCS8V and Gary KD9SV was kind enough to
observed RDF of 15 dB (Where is the government budget
when we need it). Fortunately even with some pattern or RDF compromising inter
ference a good receiving antenna remains much better than most simple
transmitting antennas for low noise receiving.
Lee K7TJR OR
Corollary: You can't
systems. I just
don’t need the hundreds of Hi-Z customers calling about changing to metal boxes
on my systems that won't be improved by this type of change...
73
Lee K7TJR
Hi-Z Antennas
Hi Jim and Lee
Before we agree that we disagree, let me elaborate on few basic concepts for a
writings of Jim K9YC are very valuable for knocking down local noise
in any RX antenna. He has addressed this many times.
Keep us posted Jamie if you need more information.
Lee K7TJR
Hi-Z Antennas
Hi Jaime
The only way to really improve signal to noise ratio is with directivity.
Better
devices like
BJT or FET transistors, even passive devices like transformers and crystal
filters.
This is directly related to the 3rd and 2nd order IMD specs on any
particular piece of equipment.
Sometimes these spurs are not just BC station harmonics.
Lee K7TJR OR
-Original Message
UK friends is 1818, which is the 2nd
harmonic for 909khz (BBC Radio 5)
Great discussion!
73 de Lee KX4TT
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Mike Waters
Sent: Monday, 12 November, 2018 13:27
To: ve...@shaw.ca
Cc
ls on
these lines but there is also 13.8 VDC at 40 ma. The fewer connections the
better to limit any possible micro arcing on these low signal lines.
P.S. Do not use cheap Chinese barrel connectors or you WILL have a
problem with connection. Experience speaking.
Lee K7TJR
Hi-Z Antennas
-Ori
radial field for the best
efficiency.
Lee K7TJR OR
A shunt fed tower is a vertical antenna so it offers lowest take off angle.
Shunt feeding avoids need for radial field. Any horizontal wire antenna is
going to put most of your radiated energy out at high angles, unless you can
get it at least a
thing.
Lee K7TJR
>>
A BOG is an excellent choice when stealth is the driving requirement, otherwise
arrays of short verticals provide significantly superior performance compared
to BOG or short Beverage occupying the same physical space.
<<
Hi Frank
Any particular reason you don
element as well as the 4-square based 8
element on an 85 foot diameter circle will do the same thing.
Lee K7TJR
On 2018-08-06 4:16 PM, n...@n4is.com wrote:
>>>
>
> Vertical arrays are mono band. You need one for 160 , another for 80,
> and if you want 40 and 30 two more. Als
Test email please ignore.
Thanks, Lee K7TJR OR
_
Topband Reflector Archives - http://www.contesting.com/_topband
Top-band email test please ignore.
Thank you
Lee K7TJR OR
_
Topband Reflector Archives - http://www.contesting.com/_topband
Test e-mail from new e-mail address. Please ignore
Lee K7TJR OR
_
Topband Reflector Archives - http://www.contesting.com/_topband
at -0.77 degrees phase shift
7.1 MHz -.29 dB at -9.0 degrees phase shift
Remember single transformers are 1/2 these values.
Single antenna losses only are quite acceptable at 630 meters and 4 turns
primary on a BN73-202 as loss wise one transformer is down less than 1 dB at
100 KHz.
Lee
already expensive electronics. For this reason I have to do as well as I can to
predict the future for my products. My observation is that leaded parts are
disappearing rapidly and this will continue.
LeeK7TJR
Hi-Z Antennas
-Original Message-
From: N2TK, Tony
Sent: Sunday, July 1
unfortunately is pricing itself out of the market now. I suspect the
2N5109 will follow as inventories shrink.. A pair of the 18A devices at ~$1.00
USD each single price in a push pull Norton configuration would in my opinion
make it worth trying as a killer wideband amp.
Just my $.02 USD.
Lee K7TJR OR
the biggest items on the checklist for a new
site.
Good Luck,
Lee K7TJR OR
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Jeff Kinzli
N6GQ
Sent: Sunday, April 01, 2018 7:46 AM
To: top Band
Subject: Topband: Soil conductivity maps
So I
Congrats – VK3IO was also my first TB QSO with Australia!!
73 de Lee KX4TT
From: Mark K3MSB
Sent: Saturday, March 31, 2018 22:11
To: topBand List
Subject: Topband: My first VK on 160M!
Huge day for me this morning
After several years of trying, I worked my first VK on Top Band! Well
some
contesting from there. Also Jimmy's logs are still on site as well. A brief
look showed it worked pretty well. Morocco is about 32 degrees North. YMMV
Lee K7TJR
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Jim Thomson
Sent: Saturday, Mar
2nd example
AA4FL KX4TT QTC (locations are preplanned so AA4FL knows where I am)
KX4TT AA4FL QRV
AA4FL S3M0 (3 serious, 10 or more minor)
KX4TT NRM (TOTAL MINOR ?)
AA4FL M27
KX4TT R T15 (Received info, T can mean - will reply in 15 or transport should
be there in 15)
73 es GUD DX de Lee
I thought I saw one spot on 1823 for them..you were
in that area. I was doing maintenance and listening only, so I didn't note your
frequency but heard your call loud and clear..-)
Lee
-Original Message-
From: David Olean [mail
I suspect it's because someone thought you were QRMing TJ2TT; He was pretty
much QSA0 for me. Local QRN/QRM has made 160 very tough for me; I could barely
hear Roger and he is usually fairly easy copy.
73 de Lee KX4TT
Tampa, FL
-Original Message-
From: Topband [mailto:topband
rk 3C0W on this
go-around.
73 de Lee, KX4TT
-Original Message-
I have no explanation for this but it is clearly the best signal every heard
from this part of the world on 160 from 3C0W was so strong i had to record
it. Jon, AA1K has put it up on his website http://www.aa1k.us/dx for you
1 - 100 of 245 matches
Mail list logo