2013 8:51 PM
To: Topband@contesting.com
Subject: Re: Topband: Balun Question
Hi Charlie,
the mast for his inv-V snapped during Hurricane Sandy and I attached
the apex to the highest remaining part of the PVC mast that snapped,
that I can reach up to. So for this moment, his Inv-V is more of a
dipole
;
>
>
> -Original Message-
> From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of
> Gary
> Smith
> Sent: Sunday, October 27, 2013 7:45 PM
> To: Topband@contesting.com
> Subject: Re: Topband: Balun Question
>
> Fellows,
>
> Thanks f
W2AU balun that it woud be
replacing!
Hope your dad enjoys it for many more years! :-)
73,
Charlie, K4OTV
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Gary
Smith
Sent: Sunday, October 27, 2013 7:45 PM
To: Topband@contesting.com
Subject: Re: To
Fellows,
Thanks for the on & off list replies, I just got back from a weekend
away & read through them all. Part of me wants to just leave it as is
but that's not practical, a good icing and the connections I made
will fail. Since I need something to relieve stress from the
copperweld and the
Unfortunately, optimum balun impedance and design really depends heavily on
the application,. There is no magic design that works best for all
applications, and the issue is so complex that almost any article falls
short.
For example, the 5000 ohms pure R will not work at 1500 watts with all
A W2DU balun, however is another story! Walt knew what he was doing!
73,
Charlie, K4OTV
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Tom W8JI
Sent: Thursday, October 24, 2013 8:41 PM
To: g...@ka1j.com; topband@contesting.com
Subject: Re: Topband
True!
-Original Message-
From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Tom W8JI
Sent: Thursday, October 24, 2013 8:41 PM
To: g...@ka1j.com; topband@contesting.com
Subject: Re: Topband: Balun question
> Though this reflector is for 160M I have an 80M question t
Though this reflector is for 160M I have an 80M question that might
be best asked here. My father W1BML is on an 80 meter net nightly.
His antenna in an inv-V with 40 & 80 elements though he never uses 40
any more. I needed to fell a couple of trees to remove branches that
were touching his copper
pband@contesting.com
Subject: Re: Topband: Balun question
I am sorry! That was not very clear.
The info on chokes worked wonderfully for me on 80m and 160m using the Big
31 snap-ons.
Not only that but lots of good info other than chokes.
Randy
On Thu, Oct 24, 2013 at 7:55 PM, Charlie Cunningham
d-boun...@contesting.com] On Behalf Of Jim
> Bennett
> Sent: Thursday, October 24, 2013 7:41 PM
> To: g...@ka1j.com
> Cc: topband@contesting.com
> Subject: Re: Topband: Balun question
>
> I was just looking through the ARRL Antenna Book - if it's RG-8, then 8
> turns wo
What "works flawlessly", Randy? The link? J
73,
Charlie, K4OTV
From: Randy Lake [mailto:randyn1...@gmail.com]
Sent: Thursday, October 24, 2013 7:51 PM
To: Charlie Cunningham
Cc: Jim Bennett; g...@ka1j.com; topband@contesting.com
Subject: Re: Topband: Balun question
Check
feeding the drivers on my home brew 5-band
> quad.
>
> Charlie, K4OTV
>
> -Original Message-
> From: Topband [mailto:topband-boun...@contesting.com] On Behalf Of Jim
> Bennett
> Sent: Thursday, October 24, 2013 7:41 PM
> To: g...@ka1j.com
> Cc: topband@contesting.
, October 24, 2013 7:41 PM
To: g...@ka1j.com
Cc: topband@contesting.com
Subject: Re: Topband: Balun question
I was just looking through the ARRL Antenna Book - if it's RG-8, then 8
turns would work if wound on an 8 inch PVC tube. However, that size PVC may
be difficult to find, and certainly wouldn
Well, might work. Another idea though, check with Fair-Rite - I believe that
they have some cores that wil fit over .405 RG-8, and I know they have lots
that sill fit over RG-58 or RG-8X. If you don't mind removing the
connector, you can just slip a bunch of them over the end of the cable and
use
I was just looking through the ARRL Antenna Book - if it's RG-8, then 8 turns
would work if wound on an 8 inch PVC tube. However, that size PVC may be
difficult to find, and certainly wouldn't be to spiffy hung way up the air. But
then again, you were thinking about 10 turns on a 12 inch diamete
15 matches
Mail list logo