Thanks guys for all the input - no pun intended.
What I have been considering, is to install a 4 square receive system,
offset from my Bog's by 45 degrees.
The two systems could then be phased as needed, for interference redux, or
signal improvement.
73,
Art NK8X
ᐧ
On Fri, Jan 22, 2016 at 1:20
What I use here is relatively simple in hooking up the NCC-1 Phaser.
The output on the unit, of courses, goes to the radio and in my case
since Icom w/o and external antenna port is use a DXE RTR-1A to provide
the the RX/TX switching. (This also allows be to choose the TX antenna
for RX with
Is there any preferred method to allow an easy choice of multiple main and
auxiliary antennas when using the phasing unit?
I never quite figured that out with the 1026. I envision ending up with
something resembling a CATV headend.
73
Art
ᐧ
On Thu, Jan 21, 2016 at 7:36 PM, Herbert Schoenbohm <
I did reverse cables constantly on the MFJ but the operations was always
troublesome and time consuming with the 1026. The DXE NCC-1 operation is
smooth and with the large phasing know obtaining nulls on much more
reliable. From what Ii have been to do with two major DX-peditions on
160 in pha
testing.com'
Subject: re: Topband: NCC-1 Phaser
Herb,
This is very interesting to me. I hope this helps your noise. I have had
11 glorious year of owning a silent QTH. Now I have a neighbour who has an
electric fence which bothers me terribly.
Spikes are every second (or so) a
, Coreen & Corey
Keswick Ridge, NB
From: Mike Smith VE9AA [mailto:ve...@nbnet.nb.ca]
Sent: January 18, 2016 6:32 PM
To: 'topband@contesting.com'
Subject: re: Topband: NCC-1 Phaser
Herb,
This is very interesting to me. I hope this helps your noise. I have had
11 glorious ye
Herb,
This is very interesting to me. I hope this helps your noise. I have had
11 glorious year of owning a silent QTH. Now I have a neighbour who has an
electric fence which bothers me terribly.
Spikes are every second (or so) and on 160m they are 20/9 (and that's with
the NB on ! ! ! ) d
After nearly two years of trying to get some measurable improvement with
the MFJ-1026 noise cancelling box I finally gave up and sold them on
E-Bay and purchased a DX-Engineering NCC-1. The frustration of the
finicky controls on the MFJ was time consuming and I never was able to
realize much b