Thanks Tom. I think I have it narrowed down with a portable. The line going
to our home is spliced to the main line along with another line going to a
building across the highway. At that spot there is a ball of wires with some
kind of what appears to be a metal fixture (clamp etc.). Just not
Jim -
Is this noise on 160M only, or all ham bands? Is 160M the worst, but all
bands afflicted?
You said your noise blanker works well on the noise, which is one clue.
Another thing you can do: Turn off the noise blanker, go to the part of the
band that has the worst noise, and set your rig fo
Jim,
Did you power down the battery backup for in-house systems such as your
security system and cable modem and routers?
Mike N2MS
- Original Message -
From: Jim Murray via Topband
To: topband@contesting.com
Sent: Sun, 25 Oct 2015 22:13:45 - (UTC)
Subject: Topband: RFI - Lots of
Thanks Cecil,Yes during daylight hours also.
_
Topband Reflector Archives - http://www.contesting.com/_topband
Jim,
At each location where I have lived, I have had line noise problems. It turns
out that the main culprit has been the insulators on the pole were either dirty
or cracked by lightning or loose hardware. If they are really old, they may
have a ball and socket connection that is *supposed*
On Sun,10/25/2015 3:13 PM, Jim Murray via Topband wrote:
This Summer I spent a lot of time and effort putting up an Inverted L and
radial system.
An important part of moving to a new QTH is grounding and bonding. One
of the things I did in my professional life was teach grounding and
bonding
Greetings,Last Fall we moved into a new location. This Summer I spent a lot of
time and effort putting up an Inverted L and radial system. Now after tuning,
etc. completed I have what appears to be power line noise, source unknown at
this time. I threw the main in our home and noise still rem