7;
Subject: Re: Topband: Twist a Flag into a Bowtie?
So, is the ground wire just left "floating", JC?No electrical
connection to the antenna itself?
Thanks and 73,
Nick
VE7DXR
At 11:23 13-12-16, JC wrote:
>Hi Nick
>
>The wire will reduce loss on the transmission line gi
on the SWR and front back. If you have
a good ground you probably won't see anything changing.
Regards
JC
-Original Message-
From: Nick Hall-Patch [mailto:n...@ieee.org]
Sent: Monday, December 12, 2016 10:59 PM
To: JC
Cc: 'topband'
Subject: Re: Topband: Twist a Flag int
lto:n...@ieee.org]
Sent: Monday, December 12, 2016 10:59 PM
To: JC
Cc: 'topband'
Subject: Re: Topband: Twist a Flag into a Bowtie?
What kind of improvement in performance is observed by providing a better
ground, JC? And, where would a ground wire (counterpoise?) be connected
with the DHDL
Sent: Sunday, December 11, 2016 10:13 AM
To: D Michael
Cc: topband
Subject: Re: Topband: Twist a Flag into a Bowtie?
Hi Mike,
Funny you should ask that.
A few months ago (September) I was looking at building a smaller size DHDL
using 4Nec2, and there were a few things I saw that I thought n
pband [mailto:topband-boun...@contesting.com] On Behalf Of Don Kirk
Sent: Sunday, December 11, 2016 10:13 AM
To: D Michael
Cc: topband
Subject: Re: Topband: Twist a Flag into a Bowtie?
Hi Mike,
Funny you should ask that.
A few months ago (September) I was looking at building a smaller size DHDL
using 4Nec2
Mike and Gang,
It was this project (terminated bowtie) that got me looking into the KD9SV
994 x5 preamp a few months ago (I published some info on this preamp a few
months ago). I think the KD9SV 994 x5 preamp sometimes called the KD9SV
VLN preamp (very low noise preamp) would be perfect for use
Hi Mike,
Funny you should ask that.
A few months ago (September) I was looking at building a smaller size DHDL
using 4Nec2, and there were a few things I saw that I thought needed
improvement (I saw things in the full size DHDL that I thought needed
improvement, it was not limited to the small si
I have two flag rx ants and I was looking at the DHDL and DK6ED Double Loop
System V2 and wondering if twisting my Flag rx ants into Bowties would improve
the forward pattern and make them narrower with better front to back.
I would just ""flip"" the termination resistor end to form a loose B