On 12.02.2021 21:35, friendlyexitnode wrote:
I'm running a very small family of exit nodes (who are friendly) and
was curious if anyone had any advice on ways to optimize their relay
configuration? I'm running them all on Ubuntu 20.04. I've reviewed the
[Arch
Hello everyone,
I'm running a very small family of exit nodes (who are friendly) and was
curious if anyone had any advice on ways to optimize their relay configuration?
I'm running them all on Ubuntu 20.04. I've reviewed the [Arch
Here we go. Thats the input i needed.
Regarding to >>
https://atlas.torproject.org/#details/E20FF09A9A800B16C1C7C16E8C0DF95F46F649B0
my advertised Bandwith is 681.33 KB/s , which is little more than 5MBps.
So its kinda "maxed out" .
> On 22 Oct 2015, at 01:42, 12xBTM <12x...@gmail.com> wrote:
Here's your problem:
On 21.10.15 8:20, Volker Mink wrote:
> Upstream 5 MBps
___
tor-relays mailing list
tor-relays@lists.torproject.org
https://lists.torproject.org/cgi-bin/mailman/listinfo/tor-relays
> On 22 Oct 2015, at 01:42, 12xBTM <12x...@gmail.com> wrote:
>
> Here's your problem:
>
>> On 21.10.15 8:20, Volker Mink wrote:
>> Upstream 5 MBps
Tor bandwidth usage is more or less symmetric upstream / downstream.
So you'll only ever get 5Mbps or less of tor traffic out of this connection.
On Wed, 21 Oct 2015 14:20:06 +0200
"Volker Mink" wrote:
> RelayBandwidthRate 1 KB # Throttle traffic to 1000KB/s (800Kbps)
> RelayBandwidthBurst 2 KB # But allow bursts up to 2000KB/s (1600Kbps)
> MaxAdvertisedBandwidth 1 KB
> (anything to change here?)
Change
Hi Folks.
Some Stats:
fingerprint: E20FF09A9A800B16C1C7C16E8C0DF95F46F649B0
cpu: 0.0% tor, 12.3% arm mem: 149 MB (34.4%) pid: 2200
cpu: 20.0% tor, 10.2% arm mem: 149 MB (34.4%) pid: 2200
load average: 0,30, 0,36, 0,33
%Cpu(s): 18,0 us, 3,1 sy, 0,0 ni, 75,3 id, 0,2 wa, 0,0 hi, 3,5
-now without HTML-
Hi Folks.
Some Stats:
fingerprint: E20FF09A9A800B16C1C7C16E8C0DF95F46F649B0
cpu: 0.0% tor, 12.3% arm mem: 149 MB (34.4%) pid: 2200
cpu: 20.0% tor, 10.2% arm mem: 149 MB (34.4%) pid: 2200
load average: 0,30, 0,36, 0,33
%Cpu(s): 18,0 us, 3,1 sy, 0,0 ni, 75,3 id, 0,2 wa,
My understanding is that Raspberry Pis top out around 800kb/s. And the
floor for a relay to get much traffic is around 1.5Mb/s.
-V
On Tue, 20 Oct 2015 at 20:08 Volker Mink wrote:
> -now without HTML-
>
> Hi Folks.
>
> Some Stats:
> fingerprint: