danfzx9r;592354 Wrote:
Thank you for all the great information. It is very helpful.
So let me ask this: Could someone please tell me what currently
available externally powered hard drive, 1TB minimum capacity, meets
the above outlined criteria so I will only have to buy a hard drive
I have the same problem, but it occurs irrespective of the source and I
have three sources of music on my harddrive. Those copied from my
computer as mp3, FLAC downloaded by db poweramp, FLAC downloaded using
EAC. I run the USB directly to the touch and have a dedicated USB drive
with only a
Today Only 12/03 the newer Toshiba Canvio 750GB model is featured on
eBay home page for $64.99 with free shipping! They are going fast!!!
RG
--
RGibran
RGibran's Profile:
sckramer;592044 Wrote:
John, did you run accross anything, or new ideas on this during your
other work?
Thanks!
I do not think this 'feature' is going to be included anytime soon. As
John mentioned in an earlier post the change looks like it needs to me
made in the firmware, so it will be
rgro;588802 Wrote:
I think Kal's right. You also might want to consider the Vortexbox
appliance, if you don't want to go the DIY server route or use your
existing computer. I just received my VBA and set it up todayit's
excellent. Plus, it'll automatically rip your CD's to flac and
What is the best App for controlling the SB touch?
--
tmauceri
tmauceri's Profile: http://forums.slimdevices.com/member.php?userid=41450
View this thread: http://forums.slimdevices.com/showthread.php?t=83244
Thanks for all your help to those who replied. The suggestions about the
hiddien partition make sense, as the touch acts as if the drive is empty
rather than crashes or has other problems during the scanning. I
formatted the drive as Mac OS X (journaled). In retrospect, I probably
should have
jnathanson;592519 Wrote:
Thanks for all your help to those who replied. The suggestions about the
hiddien partition make sense, as the touch acts as if the drive is empty
rather than crashes or has other problems during the scanning. I
formatted the drive as Mac OS X (journaled). In
Of course Mac OS can read NTSF or FAT32 ?
--
Mnyb
Main hifi: Touch + CIA PS +MeridianG68J MeridianHD621 MeridianG98DH and
assorted amps SiriuS, Classe' Primare and Dynadio speakers, Contour 4
Contour Center, and Contour
Mnyb;592525 Wrote:
There you have it Touch does not support Mac OS partitions !!!
Use:
1. FAT16
2. FAT32
3. NTFS
4. ext2/ext3
I would go for ext3 or ext2 maybe NTFS (then FAT32 as a last resort)
Sorry, My understanding of partitions is very limited. Please explain
what you mean by
jnathanson;592528 Wrote:
Sorry, My understanding of partitions is very limited. Please explain
what you mean by this.
Eh have not using a Mac since OS7 in the 90's
But what choices do you have when you want to format the drive ?
--
Mnyb
What about this:
http://www.techiecorner.com/159/how-to-format-external-hard-disk-for-mac-and-windows/
--
Mnyb
Main hifi: Touch + CIA PS +MeridianG68J MeridianHD621 MeridianG98DH and
assorted amps SiriuS, Classe' Primare
So... When using a Mac to format a hard drive exclusively for use with a
Touch, what format should I tell the Mac's Disc utility to use to
maximize the chance that things will work?
--
jnathanson
jnathanson's Profile:
Last night while jumping around some internet radio stations... My Touch
suddenly rebooted but would not come up. I would get the black screen
with the Logitech Logo, then the blue screen with the discover your
music then back to the logo screen, and so on...
I pulled the power for a minute and
Thanks for the info John.
My new Touch is on the way in the post so I'll be building a PSU along
these lines. And can try the secondary damping CR combo on a couple of
other PSUs.
Jo
--
Jo308
Jo308's Profile:
tmauceri;592518 Wrote:
What is the best App for controlling the SB touch?
iPeng for iphone/itouch.
--
garym
garym's Profile: http://forums.slimdevices.com/member.php?userid=17325
View this thread:
Were you on MySB when this happened? I think they are doing some MySB
server stuff, today my Radio did the same as you describe.
--
toby10
toby10's Profile: http://forums.slimdevices.com/member.php?userid=12553
View this
Letten;591053 Wrote:
My point exactly.
Stop messing about with static IP's theres absolutely no reason for
using this it just makes everything more complicated.
Unless you're a network manager, IT-nerd, just don't.
If you like having the same IP for your devices use DHCP reservation!
EricBergan;592580 Wrote:
Just replaced a failed SB3 with a Touch, and was surprised that Touch
doesn't support assigning an IP address, when the SB3 still does.
Independent of what is right, why remove functionality, that some
users do use?
As for why? My network monitoring software
garym;592582 Wrote:
agree. but note it is still possible. factory reset your TOUCH then
remove power. Then plug it in to your computer with an ethernet cable.
Then add power to touch. It will try to get IP address then fail.
Scroll down a bit and you'll see the add IP manually option. enter
EricBergan;592580 Wrote:
Just replaced a failed SB3 with a Touch, and was surprised that Touch
doesn't support assigning an IP address, when the SB3 still does.
Independent of what is right, why remove functionality, that some
users do use?
As for why? My network monitoring software
EricBergan;592580 Wrote:
As for why? My network monitoring software reports traffic associated
by IP address, so it's nice to have them all stay the same. Yes, can do
it in the router, but why should I have to when the product used to
support it?
If you're running network monitoring
EricBergan;592583 Wrote:
Pretty nasty workaround, especially for something that used to be easy.
I'm guessing just unplugging the ethernet wire doesn't let me do it?
I'll try when I get back home.
eric
a pain yes, and not for the casual user for sure (although before
owning my first SB, I
toby10;592584 Wrote:
I think if you connect an ethernet cable to the Touch but do not have
the other end connected to the router it then allows you to setup the
IP yourself.
I doubt that's true if the other end of ethernet cable isn't connected
to anything. Should be the same as having no
If you have a wire going from the Touch to something else other than a
router (such as a laptop, desktop, another SB etc, pretty much anything
that does NOT have a DHCP server) and you use the advanced-networking
window to connect to ethernet, it will try and connect to a DHCP
server, not find
I'm +1 on getting an answer to local service stopped due to a problem.
Guys (devs), please show the exact problem cause on the screen so I know
what to fix.. too many files, artwork, scan not complete... whatever..
just give me detailed message of an error.. or tell where I can find
one...
I'm
This software worked for me - dublicatefilesdeleter.com
--
just4work1974
just4work1974's Profile: http://forums.slimdevices.com/member.php?userid=41839
View this thread:
I'm not sure what yo mean. I was using the Touch (wireless) trough the
server software running on my desktop PC. Does that mean I was using My
Squeezebox?
--
Blazer
Blazer's Profile:
Anyone?
--
thunder3dan
thunder3dan's Profile: http://forums.slimdevices.com/member.php?userid=37821
View this thread: http://forums.slimdevices.com/showthread.php?t=80755
___
EricBergan;592580 Wrote:
As for why? My network monitoring software reports traffic associated by
IP address, so it's nice to have them all stay the same. Yes, can do it
in the router, but why should I have to when the product used to
support it?
eric
Because it's easier!
Don't tell me
30 matches
Mail list logo