DaveSch wrote:
> I'd like to do that, but I just can't see a way to get ethernet cable
> from my computer to the Touch.
> The Touch is on my stereo cabinet which is located against an outside
> wall.
> Going through the basement doesn't provide an easy way to come back up
> that wall.
>
> Dave
JohnB wrote:
> This mght have nothing to do with the problem but is your USB drive
> powered from the USB connection (rather than mains power). If so I'd try
> connecting it via a powered hub, just to eliminate one possibility.
>
> (I'm always a bit nervous about powering USB hard drives
Tex wrote:
> Hi Dave
>
> Just to be sure you read the section about the 100 song limitation in a
> play list.
Yeah, I'm not using playlists on the Touch.
I like Random Songs. (Except when it picks Christmas music).
Dave S.
Hi Dave
Just to be sure you read the section about the 100 song limitation in a
play list.
(1) Pi 3 w/ HifiBerry Digi + Pro, piCorePlayer 5.0.0, LMS 7.9.2, WD usb
drive for Music files
(1) Touch, (1) Transporter, (1) Duet
Agree with John, run lms on something else (raspberry pi with
picoreplayer)
*SqueezeBoxes:* 1x Transporter (Living room) 1x SB2 (shed), 1x Radio
(Kitchen), 1x Boom (Dining room), 1x piCorePlayer (jacuzzi), 1x
piCorePlayer (Garden) 1x OSMC + Squeezelite (Movie room), 1x Touch
(Study 2), few
OK, four days since I put in a powered hub, and it worked fine until
today.
"Locan Music Server Stopped".
Same as before.
Now I restart Logitech Media Server on the Touch and I'll be good for
another random length of time.
Is this the best I can expect, or is there something else I should do?
Hi
I've connected it via ethernet, now sits merrily telling me it's
"verifying ethernet connection". It appears I've lost the ability to
connect in any way. Unless anyone has anything to add I'll give
Apesbrain suggestion a go.
The current firmware is here:
http://update.slimdevices.com/update/firmware/7.9.2/
Touch is "fab4.bin". Copy it to a blank USB key and insert in rear of
Touch. If Touch were functional, you'd select Settings > Advanced >
Software update. In your case, I'd do a "Factory Reset" by holding the
