I sometimes use one of these,
http://hifi-products.com/Firestone-Audio-Co---Ltd--Mass-Remote-Pre-AMP-amplifier-DCD6ADCB9B3B1253-PicFront.html
Chord should be able to advise, but in some cases (I have an iFi Nano,
and it applies to this) setting the dac volume to 100% works.
ronnie
--
I'm told the SBT implements a transparent digital volume control (I.e.
no scaling artifacts) down to -48db when running into a 24 bit DAC, so
you could in fact use the SBT digital volume with the mojo. But I use a
preamp with analogue volume control.
--
Hardware: 3x Touch, 1x Radio, 2x Receiver
I wanted your suggestion as I a connection should be.
This is how I connect my Mojo after some suggestions here.
Class D Amp>Mojo via RCA to 3.5mm cable > Logitech Squeezebox Touch via
USB and I have Raspberry PI computer that is running the Logitech Media
Server. The problem here (losing conven
Well, it depends on which device has the more stable clock, essentially.
However it's generally likely that an offboard DACs own clock is more
reliable than the PC with the audio data on it.
drmatt's Profile: http://forum
drmatt wrote:
> It means the DAC dictates the rate of data send, so the DAC syncs to its
> own internal clock and "pulls" audio data from the host instead of the
> host sending a stream and dictating. Async is likely to be the highest
> quality option because the DAC doesn't rely on the PC audio
It means the DAC dictates the rate of data send, so the DAC syncs to its
own internal clock and "pulls" audio data from the host instead of the
host sending a stream and dictating. Async is likely to be the highest
quality option because the DAC doesn't rely on the PC audio card clock.
---
sckramer wrote:
> FYI USB-->
>
> Still have a touch kicking around so tried it on my PSAudio DL3 (USB1)
> and a Schiit Multibit Dac (USB2 Async).
>
> Go back into Digital Output-->Select digital output--> after you've gone
> thru a reboot and established the connection.
>
> There will be the t
FYI USB-->
Still have a touch kicking around so tried it on my PSAudio DL3 (USB1)
and a Schiit Multibit Dac (USB2 Async).
Go back into Digital Output-->Select digital output--> after you've gone
thru a reboot and established the connection.
There will be the text "[Info]" appended onto the curr
Indeed. I didn't get chance to install EDO and test it myself until the
Hugo had to go back unfortunately. I'm sure it works but it has two
modes "generic USB" and "HD USB". I believe only the second supports
asynch but could be wrong.
--
celo wrote:
> I am sorry. I couldn't understand what you mean. What is this regarding
> this to? Sorry:)
I assume this:
celo wrote:
> I cannot answer the second part of your question though
"To try to judge the real from the false will always be hard. In this
fast-growing art of 'high fide
drmatt wrote:
> This is the key to the ultimate quality. I think the driver reports it
> if you login to the SBT.
I am sorry. I couldn't understand what you mean. What is this regarding
this to? Sorry:)
celo's Profile: ht
This is the key to the ultimate quality. I think the driver reports it
if you login to the SBT.
drmatt's Profile: http://forums.slimdevices.com/member.php?userid=59498
View this thread: http://forums.slimdevices.com/showt
drmatt wrote:
> Interesting you mention connection via USB. Does that work? I know
> there is support for some offboard DACs in the SBT but does it include
> asynchronous?
Yes with EDO, USB works! I cannot answer the second part of your
question though :)
-
Am testing the Hugo as I write this. Very impressive. Too many options
and a complete pain in the butt to operate, but excellent sound quality.
I would stick with using the volume on the SBT if that's what you're
used to, and set a static line out volume level on the mojo. Watch out
though as the
pippin wrote:
> What is a Mojo?
Sorry. I should have mentioned. It is a DAC.
http://www.chordmojo.com/
celo's Profile: http://forums.slimdevices.com/member.php?userid=64476
View this thread: http://forums.slimdevices.co
What is a Mojo?
---
learn more about iPeng, the iPhone and iPad remote for the Squeezebox
and
Logitech UE Smart Radio as well as iPeng Party, the free Party-App,
at penguinlovesmusic.com
*New: iPeng 9, the Universal App for iPhone, iPad and Apple Watch*
Hello,
Just bought the Mojo and will hook it up tonight.
I will use my Mojo strictly for my hi-fi set up. No headphones. Just my
speakers.
This is what I have and how I will connect it:
Mojo > SBT via USB cable
SBT > Digital amp (no volume) via 3.5mm RCA cable
Logitech Server running on iMac
Co
17 matches
Mail list logo