The bluetooth HID driver itself is the same on all our devices. If only
a could be in the generic HID driver stack inside the kernel
(drivers/hid/)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
** Changed in: bluez (Ubuntu)
Assignee: Simon Fels (morphis) => (unassigned)
** Changed in: bluez (Ubuntu)
Assignee: (unassigned) => Konrad Zapałowicz (kzapalowicz)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subs
@Matthias: Yes let take #1500242 separately to not confuse things.
Sounds good that this seems to be an improvement for you. However lets
monitor this for a bit as it could be a thing which only happens after
some (however in your logs I never saw it detecting the sink.fake.sco
sink from pulse
This isn't a bluez thing. Either pulseaudio or telepathy-ofono (which is
currently fully controlling when we switch between the different audio
outputs).
** Changed in: bluez (Ubuntu)
Status: Confirmed => Invalid
** Also affects: pulseaudio (Ubuntu)
Importance: Undecided
Status:
Ok, pushed a "possible" fix to silo 47.
@Matthias: Can you try if the problem goes away after installing silo
47?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1546310
@Pat: With which device you see this still broken? For my two headsets
this working fine now. As I were the initial reporter I would like to
close this as we have other bugs with the same symptoms and this is then
just a duplicate.
--
You received this bug notification because you are a member
Can you add required debug information by following
https://wiki.ubuntu.com/DebuggingBluetooth ?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1552128
Title:
Music audio
I got this down to pulseaudio not being able to find the sink.fake.sco
sink element we have in place to do the suspend/resume handling of the
SCO stream. Trying some small tweaks to see if they bring the same
effect here. If they do I will push those changes to silo 47 to see if
that helps to fix
for the audio setup to work properly. Will do some more
investigation to see if I find a reason for this.
** Also affects: pulseaudio (Ubuntu)
Importance: Undecided
Status: New
** Changed in: pulseaudio (Ubuntu)
Assignee: (unassigned) => Simon Fels (morphis)
** Changed in: pulseau
There was a bug in pulseaudio which was brought in while we added
support for Android 5.x. This is only valid for current rc-proposed. A
fix is available in silo 47 (see https://requests.ci-
train.ubuntu.com/#/ticket/1059 for details). If you want to help
verifying the fix feel free to install the
** Also affects: bluez (Ubuntu)
Importance: Undecided
Status: New
** Tags added: bluez-touch
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1551858
Title:
Ok, there seems to be another problem I didn't respected yet. Powering a
controller with hciconfig will bring it into a state where not all
subsystems are initialized required for LE support. We still have a udev
rule in our bluez package included which will try to power a bluetooth
controller via
I went again through the logs and came across the following:
[ 1044.196326] Bluetooth: SMP security requested but not available
which is then followed by a lot messages like:
Jan 20 08:53:28 samsung930X3G bluetoothd[3988]: Report Map read failed:
Attribute requires authentication before
** Changed in: bluez (Ubuntu)
Status: New => In Progress
** Changed in: bluez (Ubuntu)
Assignee: (unassigned) => Simon Fels (morphis)
** Also affects: canonical-devices-system-image
Importance: Undecided
Status: New
--
You received this bug notification becau
** Changed in: android (Ubuntu)
Status: Confirmed => In Progress
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to camera-app in Ubuntu.
https://bugs.launchpad.net/bugs/1540120
Title:
[camera] fix manual focus point
** Changed in: bluez (Ubuntu)
Status: Incomplete => Confirmed
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1500242
Title:
Bluetooth devices (Jabra BT250, Audi A3
I looked a bit through the logs files this morning and will enumerate my
findings per device.
1. Audio A3
The paring attempt is clearly visible in the log files. It first tries
to use the automatic-pin-guesser which fails after one attempt and then
switches back to ask the connected agent (aka
Can someone who experience the problem please follow
https://wiki.ubuntu.com/DebuggingBluetooth and attach the requested logs
file for further investigation here?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in
Generally I don't think this is because of a lacking key event. If the
keyboard goes away also its corresponding input device node will
disappear. If that happens the upper input stack should take care about
that. Adding mir as component here too to get their view on this while
doing some more
Got this reproduced after following the steps to turn off the keyboard
while holding a key.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1550050
Title:
repeating phantom
It hardly depends on what the keyboard supports. Check via bluetoothctl
which profiles it supports. If its only HID then its not AVRCP but
otherwise it could and then we have to fix this differently.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages,
Its a problem in ofono where still creates a modem instance (exposed as
/ril_0) without any interfaces registered when the connection to the
ril-daemon fails. IMHO ofono should not create the modem instance as
long as it can't connect to rild. We agreed on keeping ofono running
even on devices
BlueZ will react either on the "Powered" property of its
org.bluez.Adapter1 interface being switch (false/true) or the bluetooth
rfkill being changed. If none of both happen the Bluetooth power status
will not change and the device will be kept discoverable if the
"Discoverable" property was set
Public bug reported:
location-service currently seems to require ofono to be around as its
otherwise doesn't give us any location updates. Was found on a device
without a cellular modem (no rild running) so ofono was never started at
boot time. This seem to irritate location-service in what ever
** Changed in: location-service (Ubuntu)
Assignee: (unassigned) => Thomas Voß (thomas-voss)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to location-service in
Ubuntu.
https://bugs.launchpad.net/bugs/1544712
Title:
@Nicola: Last release is ota9 which fixes this problem for you?
** Changed in: bluez (Ubuntu)
Status: Confirmed => Fix Released
** Changed in: canonical-devices-system-image
Status: Confirmed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
** Changed in: bluez (Ubuntu)
Assignee: (unassigned) => Simon Fels (morphis)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1525320
Title:
Aquaris E4.5 can't conn
ned) => Simon Fels (morphis)
** Changed in: bluetooth-touch (Ubuntu)
Status: New => In Progress
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluetooth-touch in Ubuntu.
https://bugs.launchpad.net/bugs/15395
Found a fix. Will put it in a silo and continue with the landing
process.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluetooth-touch in Ubuntu.
https://bugs.launchpad.net/bugs/1539566
Title:
Bluetooth dead on mako and
Landing request is a https://requests.ci-train.ubuntu.com/#/ticket/946
silo assigned is 24
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluetooth-touch in Ubuntu.
https://bugs.launchpad.net/bugs/1539566
Title:
Bluetooth
Fix is now available for testing in silo 24.
** Changed in: bluetooth-touch (Ubuntu)
Status: In Progress => Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluetooth-touch in Ubuntu.
** Tags added: bluez5
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1540478
Title:
Audio not automatically moved to the internal speaker
Status in Canonical System
Its rather important when you set the video-param-encoding-bitrate
parameter for the encoder. The code should look like
android_recorder_setParameter(recorder, "video-param-encoding-bitrate=2048");
...
android_recorder_prepare(recorder);
android_recorder_start(recorder);
The parameters are not
I ruled out that this is a bug with bluez. Actually system-settings does
show the mouse as its falling into the device-type "Network" which we
don't display in settings. We should actually stop limiting the number
of devices we're displaying and allow them all.
** Also affects:
Please note that trusty still comes with bluez5 which doesn't support BT
LE HOG devices like the mouse referenced here. I've tested with John
that the mouse is working fine on >= wily.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is
** Changed in: bluez (Ubuntu)
Status: In Progress => Invalid
** Changed in: bluez (Ubuntu)
Status: Invalid => Won't Fix
** Changed in: canonical-devices-system-image
Status: In Progress => Fix Committed
** Changed in: canonical-devices-system-image
Status: Fix
** Changed in: wpa (Ubuntu)
Status: New => In Progress
** Changed in: wpa (Ubuntu)
Assignee: (unassigned) => Simon Fels (morphis)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to wpa in Ubuntu.
Attached is the log from Pat which shows the actual problem together
with some verbose logging.
>From the log the reason for the continous hold wakelock MT662x are therm
events we're receiving from the WiFi/BT/.. combo chip. They start to
flood at one point which will keep the device awake. One
Public bug reported:
With our package for wpa-supplicant a call
$ sudo gdbus call -y -d fi.w1.wpa_supplicant1 -o
/fi/w1/wpa_supplicant1/Interfaces/1 -m
org.freedesktop.DBus.Properties.GetAll 'fi.w1.wpa_supplicant1.Interface'
fails always with
Error:
Something like in the attached patch should fix this.
** Patch added: "fix-stations-property-getter.patch"
https://bugs.launchpad.net/ubuntu/+source/wpa/+bug/1528173/+attachment/4538345/+files/fix-stations-property-getter.patch
--
You received this bug notification because you are a member
Did a first look and it seems that your headset initates the connection
and wants to connect on HSP
Dec 17 17:59:38 ubuntu-phablet bluetoothd[895]: src/profile.c:ext_confirm()
incoming connect from 00:21:3C:A0:14:A6
Dec 17 17:59:38 ubuntu-phablet bluetoothd[895]: src/service.c:btd_service_ref()
** Tags added: bluetooth bluez5
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1524939
Title:
Using telephony in car with bluetooth not possible after second
connection
@Till: You could easily go and push a MP against
https://code.launchpad.net/~phablet-team/lxc-android-config/trunk
yourself.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to lxc-android-config in
Ubuntu.
@Pat: Does it print out something like:
Suspend blocking wakelocks:
None
Resume wakeup causes:
None
Suspend failure causes:
None
Suspends:
0 suspends aborted (0.00%).
0 suspends succeeded (0.00%).
total time: 0.00 seconds (0.00%).
minimum: 0.00 seconds.
maximum:
I looked through the code in the mx4 kernel now a bit more and the
reason for the hold wakelock is that there is simply data flowing. What
triggers the data flow or what data is actually flowing is not clear yet
but I don't see any HCI frames receiving on the bluetooth stack side so
far when this
@Uranicus: Awesome writeup! Thanks a lot. However the most important
thing is missing: A copy of /var/log/syslog which would be the primary
source of information for us to debug this. The others are only side
note information.
--
You received this bug notification because you are a member of
Ah sorry, confused that. The log files for the A3 would be great too
then.
** Changed in: bluez (Ubuntu)
Status: New => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
@Tony: Thanks!
@Uranicus:
A couple of questions:
- First: For all things please follow
https://wiki.ubuntu.com/DebuggingBluetooth so that we get some more
detailed logs of what is going on in your system. That would be great
and would allow us to debug this.
- When you disconnect your Jabra
If you can it would be awesome if you can test this again with silo 9
being installed.
** Changed in: bluez (Ubuntu)
Status: Incomplete => Fix Committed
** Changed in: bluez (Ubuntu)
Assignee: (unassigned) => Simon Fels (morphis)
** Also affects: canonical-devices-system
** Also affects: canonical-devices-system-image
Importance: Undecided
Status: New
** Changed in: bluez (Ubuntu)
Assignee: (unassigned) => Simon Fels (morphis)
** Changed in: bluez (Ubuntu)
Status: In Progress => Invalid
** Also affects: pulseaudio (Ubuntu)
Impo
** Changed in: bluez (Ubuntu)
Status: In Progress => Fix Committed
** Changed in: bluez (Ubuntu)
Assignee: (unassigned) => Simon Fels (morphis)
** Also affects: canonical-devices-system-image
Importance: Undecided
Status: New
** Also affects: ofono (Ubuntu)
Impo
I went through Pats log file and it looks basically like this: The
system doesn't go into sleep mode as their is still ongoing data flowing
over the transport to the BT/WiFi/GPS combo chip. If that is real or a
bug isn't clear yet. I am currently going through the responsible
driver and see how
** Changed in: bluez (Ubuntu)
Status: New => In Progress
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1521737
Title:
Cannot enable bluetooth
Status in Canonical
** Tags added: bluetooth-ota9
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1500242
Title:
Bluetooth device (Jabra BT250, Audi A3 car kit) can not be connected
with BQ
@Tony: Can you have a look at the battery glitches?
** Also affects: ofono (Ubuntu)
Importance: Undecided
Status: New
** Changed in: ofono (Ubuntu)
Assignee: (unassigned) => Tony Espy (awe)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded
Have a fix for the crash. Uploading a new bluez package to silo 9.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1521737
Title:
Cannot enable bluetooth
Status in
@Pat: No that is not a file descriptor leak. That is just an internal
handle not related to any file descriptors to store GATT related
attributes. This due to some unconverted profiles after
API/infrastructures changes and known upstream. Ignore that.
Also ignore that there is no
It would be awesome if you get the crash file from
/var/crash/_usr_lib_bluetooth_bluetoothd.0.crash and could send it to
me.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
Examined the crash file I got from Pat:
#0 strlen () at ../sysdeps/arm/armv6t2/strlen.S:85
85 ../sysdeps/arm/armv6t2/strlen.S: No such file or directory.
(gdb) bt
#0 strlen () at ../sysdeps/arm/armv6t2/strlen.S:85
#1 0xb6f13ebc in avrcp_handle_media_player_list (session=0xb8f339c0,
There are two connections for HFP. One is the service level connection
which is used for exchanging AT commands which is setup all the device
the device is connected on HFP even if no call is active. This way we
also accept/decline calls. The second connection is the actual SCO
channel fo sending
Thanks a lot!
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1520584
Title:
[Meizu MX4] Sound shuttering using Bluetooth car connection
Status in bluez package in Ubuntu:
** Tags added: bluez5
** Tags added: bluetooth-ota9
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1520584
Title:
[Meizu MX4] Sound shuttering using Bluetooth car
It would be awesome if you can follow
https://wiki.ubuntu.com/DebuggingBluetooth so that we get some more
debug information.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
Possible, but I am missing the syslog file here and without it its
pretty hard to say anything more and reproducing isn't even possible
too.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
** Changed in: bluez (Ubuntu)
Status: New => In Progress
** Changed in: bluez (Ubuntu)
Status: In Progress => Invalid
** Changed in: bluez (Ubuntu)
Status: Invalid => Incomplete
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages,
** Changed in: bluez (Ubuntu)
Status: Incomplete => In Progress
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1519594
Title:
No sounds for ongoing call in both
** Also affects: pulseaudio (Ubuntu)
Importance: Undecided
Status: New
** Also affects: telepathy-ofono (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in
** Changed in: bluez (Ubuntu)
Status: Incomplete => Invalid
** Tags removed: bluetooth-ota9 bluez5
** Tags added: touch-audio-routing
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
Can you please follow https://wiki.ubuntu.com/DebuggingBluetooth and
attach a syslog with debug output enabled? Thanks.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1520161
** Changed in: bluez (Ubuntu)
Status: New => In Progress
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1519809
Title:
No sound is routed to bluetooth headset after
Added some debug statements to the arale kernel and now waiting for the
problem to reappear here to find out more details.
** Patch added: "0001-Add-STP-MT662x-wakelock-traces.patch"
If somebody else wants to do this too the used boot.img for arale is
attached here.
** Attachment added: "boot.img"
https://bugs.launchpad.net/canonical-devices-system-image/+bug/1505241/+attachment/4526228/+files/boot.img
--
You received this bug notification because you are a member of
Can you describe a bit more in detail what happens after you've ended
the call? Is music played again or not? Is the music coming throught he
phone speaker or the HFP headset? ...
** Tags added: bluetooth-ota9 bluez5
--
You received this bug notification because you are a member of Ubuntu
Touch
This isn't bluetooth specific but should count for any keyboard being
connected somehow if its bluetooth or usb.
** Also affects: unity8 (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is
** Changed in: bluez (Ubuntu)
Status: New => Incomplete
** Changed in: bluez (Ubuntu)
Assignee: (unassigned) => Simon Fels (morphis)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
** Tags added: bluetooth-ota9 bluez5
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1520161
Title:
The sound of music is not heard by a BT headset,it still comes from
Thanks. That issue is known and nothing related to bluetooth or bluez
itslef but more an issue with the general way of how we do audio routing
and switching between different outputs.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is
>From the last kernel log this looks like a bug which was recently fixed
upstream in the linux kernel.
See
-
https://git.kernel.org/cgit/linux/kernel/git/bluetooth/bluetooth-next.git/commit/net/bluetooth?id=75e34f5cf69bd731d3b7375a786d4a15494fb8c6
-
** Tags added: bluetooth-ota0
** Tags removed: bluetooth-ota0
** Tags added: bluetooth-ota9
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1519718
Title:
Screen doesn't
** Tags added: bluetooth-ota9
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1519594
Title:
No sounds for ongoing call in both sides when connecting a BT speaker
Status in
** Tags added: bluetooth-ota9
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1505241
Title:
Phone does not suspend
Status in Canonical System Image:
In Progress
Status
Looks like I've found the reason for this. Seems to be the timing which
is somehow different on your side to what I saw before. Will give some
more details later today where to get the updated pulseaudio packages
from to test on your side.
** Tags added: bluetooth-ota9 bluez5
--
You received
It looks like the mouse is correctly hooked up into the system:
Nov 26 02:41:47 ubuntu-phablet kernel: [ 310.071943] hid-generic
0005:046D:B014.0001: unknown main item tag 0x0
Nov 26 02:41:47 ubuntu-phablet kernel: [ 310.072340] input: Bluetooth Mouse
M336/M337/M535 as
Did you reboot after following the wiki page? The new syslog still
doesn't seem to have the debug switches enabled.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1519594
Still the same in syslog. Can you verify all steps in
https://wiki.ubuntu.com/DebuggingBluetooth manually?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1519594
Title:
No
Thanks for the detailed syslog!
Can you run
$ sudo btmon -w test.snoop
then reproduce the bug (remove the mouse in settings first and then
reconnect/repair).
Afterwards send me the test.snoop by mail.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded
Did you connect the BT headset when you were registered with a telephony
network operator?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1519809
Title:
No sound is routed
Also can you give me the exact name of the mouse you're using?
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1519718
Title:
Screen doesn't change after connecting a BT
Can you please attach the missing syslog as mentioned in
https://wiki.ubuntu.com/DebuggingBluetooth
That is the most interesting one.
** Tags added: bluez5
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
Class 0x260404 is major class 'Audio/Video' and minor class 'Wearable
Headset Device'. With this marking this device as headset is the right
thing to do as we don't have any other way to find out what it is.
** Changed in: ubuntu-system-settings (Ubuntu)
Status: Incomplete => Invalid
**
Can you reproduce this bug with following
https://wiki.ubuntu.com/DebuggingBluetooth? The logs attached doesn't
contain any debug information which would be really helpful.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to
@hasselmm: Can you please follow
https://wiki.ubuntu.com/DebuggingBluetooth so that we get some more
details on what is going wrong?
Btw. what do you mean with "File transfers simply timeout."? We don't
support file transfers over bluetooth on Ubuntu Touch yet.
--
You received this bug
That isn't that easy as you looks like. It depends hardly on what the
device says it is. Can you please follow the steps for bluetoothctl on
https://wiki.ubuntu.com/DebuggingBluetooth so find out what the class-
of-device for this device is? This field encodes what type of device the
speaker says
*** This bug is a duplicate of bug 1334315 ***
https://bugs.launchpad.net/bugs/1334315
"no support to the phone contacts": Done
" no last 10 calls (in/out) list": No work started yet, duplicates 1479442
" no indication of GPRS/3G signal strength": Done, landed with bluez5 in
rc-proposed now
@hasselmm: No. Ignore "Not enough free handles to register service".
That is just because of some internal things and doesn't cause any
problem.
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
This is quite confusing. Does
> 3.Make a call to DUT
> >Ringtone sounds from the phone
mean you heard the ringtone on the phone or is just your expectation?
> No sounds for the call in both sides
You mean you didn't heard a ringtone on both phones you used to setup
the call? Or you didn't
Can you verify this still happens with bluez5 landed in rc-proposed? If
yes, please follow https://wiki.ubuntu.com/DebuggingBluetooth to add
additional information to this bug report we absolutely need to start
work.
** Changed in: bluez (Ubuntu)
Status: New => Incomplete
** Tags added:
** Tags added: bluez5
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
https://bugs.launchpad.net/bugs/1515179
Title:
[nexus7][bluez5] Unable to pair with Arc Touch Bluetooth
Status in ubuntu-nexus7:
nd
not HSP or HFP. You can find out what each device supports by looking at
its details with bluetoothctl.
** Changed in: bluez (Ubuntu)
Assignee: (unassigned) => Simon Fels (morphis)
** Changed in: bluez (Ubuntu)
Status: New => Invalid
** Also affects: telepathy-ofono (Ubunt
Can others please retest this also on the new BlueZ 5 stack in rc-
proposed? That would be awesome and would help us to close this bug :-)
--
You received this bug notification because you are a member of Ubuntu
Touch seeded packages, which is subscribed to bluez in Ubuntu.
101 - 200 of 363 matches
Mail list logo